Matek H743-WING V3 Flight Controller with OSD, Baro and PDB for ArduPilot / INAV

$218.99

Matek H743-WING V3 flight controller for ArduPilot and INAV fixed wing: STM32H743, dual IMU, baro, OSD and PDB.

Create an account to earn at least 218 QRC Rewards points with this item.

Description

This matek h743-wing v3 flight controller is built for ArduPilot and INAV fixed wing aircraft. A 480 MHz STM32H743 runs dual IMUs, a DPS310 barometer, OSD and a PDB with 220A current sense on one board.

Matek H743-WING V3 flight controller for fixed wing

Dual IMU redundancy pairs an ICM42688-P with an ICM42605, so a drifting gyro sensor does not cost the airframe. Seven UARTs with built-in inversion, 13 PWM outputs, 2x I2C, CAN and 6 ADC inputs carry GPS, airspeed, receiver, telemetry and two switchable cameras.

Three BEC rails cover servos, receiver and camera gear: an 8A servo rail at 5V, 6V or 7.2V by jumper, a 2A 5V rail and a 2A 9V or 12V rail. The kit ships with the H743-WING V3 board, USB-C and passive buzzer extender, extender cables, a 470uF 35V capacitor and Dupont pins.

Specifications

  • MCU: STM32H743, 480 MHz
  • IMU: Dual IMU: ICM42688-P and ICM42605
  • Barometer: DPS310 barometer
  • OSD: On-screen display
  • PDB: Built-in PDB with 220A current sense, 8-36V input
  • BEC: Three rails: 8A servo rail 5V/6V/7.2V, 2A 5V, 2A 9V/12V
  • I/O: 7 UARTs, 13 PWM outputs, 2x I2C, CAN, 6 ADC inputs
  • Firmware: ArduPilot Plane 4.2.0 or newer, INAV 5.0 or newer
  • Size: 2.13 x 1.42 x 0.51 in
  • Weight: 1.12 oz

Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.

Additional information

Weight 0.1 lbs
Dimensions 4 × 3 × 1 in
Configuration

H743-WING V3

Reviews

There are no reviews yet.

Be the first to review “Matek H743-WING V3 Flight Controller with OSD, Baro and PDB for ArduPilot / INAV”

Your email address will not be published. Required fields are marked *