Description
A refill coil saves money only when you have a spool to load it on. This is that spool. The Anycubic reusable filament spool takes 1kg Anycubic refill coils in 1.75mm and turns them into a roll your printer can mount and feed.
It fits the refills Quality RC Parts already sells: Anycubic PLA Filament Refill (1.75mm, 1KG), Anycubic PETG Filament Refill (1.75mm, 1KG), and Anycubic PLA+ Filament Refill (1.75mm, 1KG). One spool serves every refill of that size. Buy the spool once, then buy refills.
Loading it is a four-step job, straight from Anycubic. First, label the filament: remove both stickers and both chips from the refill (if present) and install the new chip stickers onto both spool flanges. The identification chips travel with the refill, not with the spool, so the ACE Pro still reads the material, color, and remaining volume once the chips are on the flanges. Second, open the spool, align the filament with the latch, and snap the coil into place. Third, close the spool, press firmly, and rotate until you hear a click. That click is the lock. Fourth, only once the spool is locked, remove the bonding strap and thread the filament into the spool hole.
The order matters. Cut a strap before the spool halves are locked and the coil loosens, loops cross, and the print jams. Lock first, straps last. The threaded connection between the halves keeps the spool stable while it feeds, which is what stops the coil from scattering mid-print.
This spool is empty. No filament is included. If you have no refill coil yet, buy a refill with it: the PLA refill for easy everyday parts, the PLA+ refill for tougher mounts and brackets, or the PETG refill for parts that take hits or live outdoors. The full loading steps and the break-even math are in our guide, Filament With Spool vs Refill: Save Money in 2026.
Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping. Quality RC Parts ships within the USA only.
Specs:
- Fits: Anycubic 1kg refill coils, 1.75mm (PLA, PLA+, PETG)
- Spool construction: two halves, threaded connection, twist-lock with click
- Spool size: 196 x 67mm
- Material: ABS
- High-temperature resistant: up to 80C, compatible with most filament dryers
- Identification: ACE Pro / ACE 2 Pro chip stickers mount on both flanges; chips ship with the refill, not with the spool
- ACE / ACE 2 Pro compatibility: Compatible
- Reusable: Yes, keep for future refills
- Filament included: None, spool only
Specifications
| Specification | Value |
|---|---|
| Filament diameter | 1.75mm |
| Refill weight | 1kg |
| Spool type | Reusable, two halves, threaded twist-lock |
| Spool size | 196 x 67mm |
| Material | ABS |
| High-temperature resistance | Up to 80C, compatible with most filament dryers |
| Identification | ACE Pro / ACE 2 Pro chip stickers mount on the flanges (chips ship with the refill, not with the spool) |
| Filament included | None, spool only |
Who is this for?
Best for anyone already buying Anycubic 1kg refill coils in 1.75mm. One spool serves every refill of that size, so the spool is bought once and the refills keep coming.
Not for filament that is not an Anycubic 1kg refill coil in 1.75mm. This spool is empty, with no filament included.
Frequently asked questions
What refills fit this spool?
Anycubic 1kg refill coils in 1.75mm: PLA, PLA+, and PETG. One spool serves every refill of that size.
How do I load a refill coil onto this spool?
Four steps, straight from Anycubic: label the filament with the chip stickers on both flanges, open the spool and snap the coil in, close and rotate until it clicks, and only then remove the bonding strap and thread the filament into the spool hole.
Are the identification chips included with the spool?
No. The chips ship with the refill, not with the spool. The chip stickers mount on the flanges so the ACE Pro still reads the material, color, and remaining volume.
Why does the loading order matter?
Cut a strap before the spool halves are locked and the coil loosens, loops cross, and the print jams. Lock first, straps last.
Related guides: Filament Refill Spool Adapter Guide: Fit and Load.








Reviews
There are no reviews yet.