
How to Keep a Raspberry Pi Cool with Fans and Heatsinks
Keep a Raspberry Pi cool with a small fan, adhesive heatsinks, or a case that combines both. A 30 by 30 by 7 mm fan runs on 5 V or 3.3 V. Heatsinks stick to the processor and memory chips with thermal tape. A case with a dual fan and heatsinks cools the board under heavy load.

Quick facts
| Fact | Value |
|---|---|
| Cooling fan | 30 x 30 x 7 mm, 5 V or 3.3 V, $14.99 for 4 |
| Heatsink kit, 30-piece | 8 sizes, aluminum, adhesive backing, $10.99 |
| Heatsink kit, 4-piece | 3 aluminum plus 1 copper, $7.99 |
| Armor case | Aluminum, dual fan plus heatsinks, Pi 4, $19.99 |
| Fan fit | Pi 5, 4, 3B+, 3, 2, B+, Zero, and other boards |
| Heatsink fit | Pi 5, 4, 3, 2, B+, and other boards |
Why does a Raspberry Pi need cooling?
A Raspberry Pi slows itself down when its processor gets too hot under load.
Video work, camera streaming, and long compiles push the processor hardest.
A fan or heatsink moves heat away from the chip so the board holds its speed.
Cooling matters most in a closed case, where still air traps heat around the board.
Should you use a fan or heatsinks?
Heatsinks suit quiet builds, since they have no moving parts and no noise.
A fan suits heavy loads, since moving air cools the whole board, not just one chip.
The 4-pack of 30 mm fans costs $14.99 and runs on 5 V or 3.3 V.
Use both when the Pi runs hot work in a case: sinks on the chips and a fan moving air.
How do you fit heatsinks on a Raspberry Pi?
Pick a sink that matches each chip, then peel the adhesive backing and press it on.
The 30-piece kit costs $10.99 and holds 8 sizes for processors, memory, and regulators.
The 4-piece kit costs $7.99 and holds 3 aluminum sinks plus 1 copper sink.
Press each sink flat and let the thermal tape bond before you power the board.
How do you wire a Pi cooling fan?
The fan has two separate terminals, so you pick 5 V or 3.3 V when you wire it.
Wire it to 5 V for maximum airflow, or to 3.3 V for quieter operation.
Each fan measures 30 by 30 by 7 mm, and screws and nuts come in the pack.
The fans fit most standard Raspberry Pi cases and mount with the included screws.
What did we check on the bench?
We matched every price in this guide to the live store price on November 20, 2026.
We checked the fan listing states 30 by 30 by 7 mm size, 5 V or 3.3 V wiring, and 8 images.
We checked the 30-piece heatsink listing states 8 sizes with adhesive backing on every sink.
We checked the armor case listing states a dual cooling fan plus heatsinks for the Pi 4 Model B.
How the options compare
| Item | Cooling type | Fit | Price |
|---|---|---|---|
| Cooling fan, 4-pack | Active fan, 5 V or 3.3 V | Pi 5, 4, 3, 2, Zero | $14.99 |
| Heatsink kit, 30-piece | Passive, 8 sizes | Pi 5, 4, 3, 2 | $10.99 |
| Heatsink kit, 4-piece | Passive, aluminum plus copper | Pi 4, 3B+, 3, 2 | $7.99 |
| Aluminum armor case | Dual fan plus heatsinks | Pi 4 Model B | $19.99 |
How do you cool a Raspberry Pi in 6 steps?
- Power the Pi down and take it out of its case.
- Clean the processor and memory chips so the tape bonds well.
- Stick a heatsink on each hot chip, starting with the processor.
- Mount the 30 mm fan so it blows air across the board.
- Wire the fan to 5 V for maximum airflow or 3.3 V for quieter running.
- Power the Pi up and run your normal workload to confirm it stays stable.
Parts that fit this guide
In-stock parts ship from the New York, USA warehouse in 1-2 business days. Prices below are the live store prices we verified on November 20, 2026.
Raspberry Pi Cooling Fan 4-Pack, 30x30x7mm 5V / 3.3V DC Brushless Quiet Fan with Screws ($14.99)
Raspberry Pi Cooling Fan 4-Pack at $14.99. Four 30 by 30 by 7 mm brushless fans run on 5 V or 3.3 V. Screws and nuts are included.
Raspberry Pi Heatsink Kit 30-Piece, 8 Sizes, Aluminum Heatsinks for Pi 5 / 4 / 3 / 2 ($10.99)
Raspberry Pi Heatsink Kit 30-Piece at $10.99. It holds 30 aluminum sinks in 8 sizes with adhesive backing for Pi 5, 4, 3, and 2 boards.
Raspberry Pi Heatsink Kit, 3 Aluminum + 1 Copper with Thermal Adhesive Tape, for Pi 4 / 3 / 2 ($7.99)
Raspberry Pi Heatsink Kit at $7.99. It holds 3 black anodized aluminum sinks plus 1 copper sink, each with thermal adhesive tape backing.
Raspberry Pi 4 Aluminum Armor Case with Dual Cooling Fan and Heatsinks (Board Not Included) ($19.99)
Raspberry Pi 4 Aluminum Armor Case at $19.99. It pairs a dual cooling fan with heatsinks and thermal tape, and GPIO and all main connectors stay accessible. Board not included.
Shop the full range: Raspberry Pi & Pico at Quality RC Parts. See also: Related guide.
Frequently asked questions
Does a Raspberry Pi need a fan?
It depends on the workload. Light use runs fine on heatsinks alone, while video work and long compiles run cooler with a fan moving air.
Can I run a Pi fan on 3.3 V instead of 5 V?
Yes. The 30 mm fans in this guide wire to 5 V for maximum airflow or 3.3 V for quieter operation.
Do heatsinks fit every Raspberry Pi board?
The 30-piece kit fits Pi 5, 4, 3, 2, and B+ boards. Pick the sink size that matches each chip on your board.
What does the aluminum armor case include?
The case includes a dual cooling fan, a heatsink set, thermal tape, and screws for the Pi 4 Model B. The Raspberry Pi board is not included.
Sources
Last updated: November 20, 2026.
