LiPo Connector Choice: XT60 vs EC5 vs T Connector, Cell Count, and C Rating
LiPo connector choice starts with the plug already fitted to your model, not with the biggest pack in the list. Match the connector, then match the cell count to your speed controller, then check that the C rating covers the current your setup draws. The examples below use live Zeee and OVONIC packs and live speed controllers checked November 18, 2026.
Last updated: November 18, 2026. Pack specs and prices in this guide were checked on that date. Prices are the effective prices shown on the live listings.
LiPo connector choice starts with the plug on your model
Every LiPo pack in this guide has two plugs. The main discharge plug carries power to the speed controller. The smaller balance plug lets a balance charger read each cell. This guide is about the main plug first, because a pack with the wrong main plug does not connect to your model at all.
XT60, EC5, and T connector plugs do not mate with each other. An XT60 plug will not fit an EC5 socket, and neither will fit a T connector. If your speed controller has an XT60 plug fitted, buy an XT60 pack, change the plug on the pack or the speed controller, or use an adapter. Changing a plug means soldering, and an adapter adds one more joint in the power path. The simplest and most reliable choice is to match the plug from the start.
Connector current ratings vary by source and by manufacturer, and published tables disagree with each other. This guide does not assign a generic current rating to EC5 or T connector plugs. It quotes only the ratings stated on the live listings it links, and it treats the speed controller rating and the pack C rating as the numbers that decide whether a combination makes sense.
What each connector looks like in the live listings
| Connector | Live pack examples | Live speed controller examples | Listing notes |
|---|---|---|---|
| XT60 | Zeee 2S 2200mAh, OVONIC 3S 1300mAh, OVONIC 4S 5200mAh | 40A Brushless ESC (XT60), Skywalker 40A V2 (XT60-Connector) | XT60H connector set lists 30A rated and 60A max current, 12AWG silicone wire. |
| EC5 | OVONIC 6S 5200mAh 1-Pack and 2-Pack | Skywalker 80A V2 (EC5 Connector) | EC5 appears on the 6S 5200mAh packs and the 80A speed controller in this guide. |
| T connector | Zeee 3S 2200mAh Shorty | Skywalker 40A V2 (T-Connector) | Also called a Deans-style plug on the speed controller listing. Cell range and BEC are not stated on that listing. |
The XT60H set is the only connector set linked in this guide. Its listing states gold-plated copper contacts, a keyed nylon housing that prevents reverse polarity, and a half-open end design for soldering. It sells as 10 pairs for $13.99. If you change plugs, check the polarity twice before you solder, and check it again before the first connection. A reversed plug can damage the speed controller and the pack.
Cell count sets the voltage
Cell count is the S number. Each LiPo cell is 3.7V nominal, 4.2V when full, and about 3.8V at storage voltage. Multiply by the cell count to get the pack voltage. A speed controller lists the cell counts it accepts. Never run a pack with more cells than the speed controller input range allows, and check the motor rating separately. No motor rating is claimed in this guide.
| Pack | Nominal voltage | Full voltage | Storage voltage | Connector |
|---|---|---|---|---|
| 2S | 7.4V | 8.4V | 7.6V | XT60 on the Zeee 2S pack below |
| 3S | 11.1V | 12.6V | 11.4V | XT60 or T connector on the packs below |
| 4S | 14.8V | 16.8V | 15.2V | XT60 on the OVONIC 4S pack below |
| 6S | 22.2V | 25.2V | 22.8V | EC5 on the OVONIC 6S packs below |
Voltage decides speed and power in a rough sense, but it is not a free upgrade. A model set up for 3S may overheat or over-rev on 4S, and a speed controller rated for 2-3S must never see a 4S pack. Read the speed controller input range and the motor rating for your exact model before you change cell counts. The pack voltage table above is arithmetic from the per-cell values, not a claim that any model accepts any cell count.
How to read the C rating
The C rating multiplies the pack capacity to give a listed maximum continuous discharge current in amps. Multiply capacity in amp-hours by the C number. A 2200mAh pack is 2.2Ah. At 50C, the multiplication gives 110A. A 1300mAh pack is 1.3Ah. At 120C, the multiplication gives 156A. A 5200mAh pack is 5.2Ah. At 130C, the multiplication gives 676A.
Those products are arithmetic from the listed values. They are not measured test results, and they do not mean the rest of the system can carry that current. The motor, the speed controller, the wiring, and the connector all limit what the system actually draws. A high C rating does not force current into a setup. The setup draws what it draws, and the pack must be able to supply it without excess heat or voltage sag.
| Pack | Capacity and C rating | Listed C rating math | Energy on the listing | Price checked November 18, 2026 |
|---|---|---|---|---|
| Zeee 2S LiPo Battery, 2200mAh, 50C, 7.4V, Shorty, XT60 Connector, 1-Pack | 2200mAh, 50C | 2.2Ah x 50C = 110A | 16.28 Wh | $20.99 |
| Zeee 3S LiPo Battery, 2200mAh, 50C, 11.1V, Shorty, T Connector, 1-Pack | 2200mAh, 50C | 2.2Ah x 50C = 110A | 24.42 Wh | $23.99 |
| OVONIC 3S LiPo Battery, 1300mAh, 120C, 11.1V, XT60 Connector, 1-Pack | 1300mAh, 120C | 1.3Ah x 120C = 156A | 14.43Wh | $21.99 |
| OVONIC 4S LiPo Battery, 5200mAh, 130C, 14.8V, XT60 Connector, Hard Case, 1-Pack | 5200mAh, 130C | 5.2Ah x 130C = 676A | 76.96Wh | $57.99 |
| OVONIC 6S LiPo Battery, 5200mAh, 130C, 22.2V, EC5 Connector, 1-Pack | 5200mAh, 130C | 5.2Ah x 130C = 676A | 115.44Wh | $84.99 |
C ratings are manufacturer listings, and different brands do not test them the same way. Treat the C rating as a comparison within one brand and one range, not as a guarantee across brands. If two packs have the same capacity and voltage but different C ratings, the higher C rating should sag less under heavy load, but the only numbers you can trust for your model are the speed controller rating and the motor rating.
Match the pack to the speed controller
Three things must agree: the connector, the cell count, and the current. The connector must match or be changed. The pack cell count must sit inside the speed controller input range. The speed controller continuous rating must cover the current your motor and propeller or gearing draw at full load. Check the motor specification for your exact setup. This guide does not assign a motor to any pack.
| Speed controller | Current on the listing | Input range on the listing | Connector fitted | Price checked November 18, 2026 |
|---|---|---|---|---|
| 40A Brushless ESC (XT60) | 40A continuous, 55A burst up to 10 seconds | 2-3S LiPo | XT60 pre-soldered | $15.99 |
| Skywalker 40A V2 (XT60-Connector) | 40A continuous, 60A burst | 3-4S LiPo | XT60 pre-soldered | $22.99 |
| Skywalker 40A V2 (T-Connector) | 40A continuous | Not stated on the listing | T-connector | $20.99 |
| Skywalker 80A V2 (EC5 Connector) | 80A continuous, 100A burst | 3-6S LiPo | EC5 pre-soldered | $48.99 |
Worked matches from the tables above show the method. The Zeee 2S XT60 pack matches the 40A Brushless ESC (XT60) on connector and on cell count, since 2S sits inside its 2-3S range. The OVONIC 4S XT60 pack matches the Skywalker 40A V2 (XT60-Connector) on connector and on cell count, since 4S sits inside its 3-4S range. The OVONIC 6S EC5 pack matches the Skywalker 80A V2 (EC5 Connector) on connector and on cell count, since 6S sits inside its 3-6S range. The Zeee 3S T connector pack matches the Skywalker 40A V2 (T-Connector) on the plug, but that listing does not state a cell range, so check the listing and the manual for the input range before you order that combination.
Do not run a 6S pack on a 2-3S speed controller. Do not run a 4S pack on a 3-4S speed controller and assume the motor is fine. The speed controller range is only one of the limits. Motors, propellers, gearing, and cooling all have their own limits, and they are not covered by the pack or speed controller listings in this guide.
Check the balance plug too
LiPo packs also carry a balance plug with one more pin than the cell count. A 2S pack uses a 3-pin plug, a 3S pack uses a 4-pin plug, a 4S pack uses a 5-pin plug, and a 6S pack uses a 7-pin plug. The listings in this guide state JST-XHR-3P for the 2S pack, JST-XHR-4P for the 3S T connector pack, JST-XHR-5P for the 4S pack, and JST-XHR-7P for the 6S pack. The OVONIC 3S 1300mAh listing does not state a balance plug type in the fetched text, so check that listing before you buy balance leads for it.
Balance charging needs both plugs connected: the main plug for power and the balance plug so the charger can read each cell. A balance charger stops each cell at 4.2V. The OVONIC listings state to stop charging when any cell reaches 4.2V, to use a LiPo balance charger only, and never to charge a LiPo battery unattended. The Zeee listings state to charge only with a LiPo-specific balance charger and never to charge unattended. Follow those listing instructions.
Size, weight, and tray fit
Connector and voltage are not the whole choice. The pack must fit the battery tray and sit at the right balance point. The Zeee 2S shorty pack measures 73 x 34 x 18.5 mm and weighs 98 g. The Zeee 3S shorty pack measures 75 x 34 x 26.5 mm and weighs 137 g. The OVONIC 3S 1300mAh pack measures 73.64 x 35.74 x 22.39 mm and weighs 120 g. The OVONIC 4S hard case pack measures 5.47 x 1.89 x 1.97 in and weighs 1.15 lb. The OVONIC 6S pack measures 5.28 x 1.75 x 2.20 in and weighs 1.48 lb. Measure your tray before you order, and leave room for the leads and the balance plug. A pack that fits only by force will stress the leads and the tray.
Hard case packs add protection against knocks. The OVONIC 4S pack in this guide is a hard case pack. Soft case packs are lighter for the same capacity but need more care in handling and mounting. Either way, strap the pack down so it cannot shift in flight or during a run, and keep the leads clear of moving parts and sharp edges.
1-pack or 2-pack
The OVONIC 6S 5200mAh EC5 pack sells as a 1-pack for $84.99 and as a 2-pack for $153.99. Two single packs would cost $169.98, so the 2-pack costs $15.99 less than two singles, or about $77.00 per pack. Buy the 2-pack only if you will use both packs and can store both at storage voltage between uses. A spare pack left fully charged for weeks is worse than a pack you fly and store correctly. For the other packs in this guide, check the Batteries & Chargers category for the pack counts currently listed.
Selection checklist
- Read the plug on your speed controller first. Buy the same plug, or plan a soldered plug change.
- Read the speed controller input range. The pack cell count must sit inside it.
- Read the motor rating for your exact setup. Do not change cell counts on voltage alone.
- Multiply capacity in amp-hours by the C rating. Compare the result with the speed controller continuous rating and the motor draw.
- Measure the tray. Compare length, width, and height with the listing dimensions, plus room for leads.
- Check the balance plug pin count against your charger balance port.
- Confirm you own a LiPo balance charger that covers the pack cell count before the pack arrives.
- Check the listing price and stock on the day you order. Prices in this guide were checked November 18, 2026.
Packs and parts in this guide
All prices below are effective prices checked November 18, 2026. Zeee 2S LiPo Battery, 2200mAh, 50C, 7.4V, Shorty, XT60 Connector, 1-Pack at $20.99. Zeee 3S LiPo Battery, 2200mAh, 50C, 11.1V, Shorty, T Connector, 1-Pack at $23.99. OVONIC 3S LiPo Battery, 1300mAh, 120C, 11.1V, XT60 Connector, 1-Pack at $21.99. OVONIC 4S LiPo Battery, 5200mAh, 130C, 14.8V, XT60 Connector, Hard Case, 1-Pack at $57.99. OVONIC 6S LiPo Battery, 5200mAh, 130C, 22.2V, EC5 Connector, 1-Pack at $84.99. XT60H Male and Female Connector Set with Sheath Housing, Gold-Plated, 10 Pairs at $13.99. Speed controllers: 40A Brushless ESC (XT60) at $15.99, Skywalker 40A V2 (XT60-Connector) at $22.99, Skywalker 40A V2 (T-Connector) at $20.99, and Skywalker 80A V2 (EC5 Connector) at $48.99.
Related reading: How to Choose a Zeee LiPo by Connector and Capacity covers the wider Zeee range by connector and capacity. LiPo Charge and Flight Time Tables With Worked Examples covers charge time and flight time math. How to Balance-Charge a LiPo Pack Without Guessing covers balance charging setup.
Shipping
Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping. Check the live listing for the current price and stock before you order.
Frequently asked questions
Can I plug an XT60 pack into an EC5 speed controller?
No. XT60, EC5, and T connector plugs do not mate with each other. Match the plug, change the plug by soldering, or use an adapter, and check the current path before you run the setup at full load.
Does a higher C rating make my model faster?
Not by itself. The C rating sets how much current the pack is listed to supply. Speed comes from voltage, motor, propeller or gearing, and weight. A higher C rating can reduce voltage sag under heavy load, but it does not change the motor rating.
Can I use a 4S pack on a 2-3S speed controller?
No. The pack cell count must sit inside the speed controller input range. A 4S pack on a 2-3S speed controller exceeds the stated range. Check the listing and the manual before you connect any pack.
What does the balance plug do?
The balance plug lets a balance charger read each cell separately and stop each cell at 4.2V. The pin count is one more than the cell count. Connect both the main plug and the balance plug when you balance charge.
Should I buy the 2-pack or two single packs?
Compare the live prices. For the OVONIC 6S EC5 pack checked November 18, 2026, the 2-pack at $153.99 costs $15.99 less than two singles at $84.99 each. Buy the 2-pack only if you will use and store both packs correctly.
Sources
- EuroRC: RC Battery Connector Types Explained (checked November 18, 2026; connector comparison and balance plug pin rule; current ratings in that guide differ from other published tables, so this guide quotes listing ratings only)
- How to Choose a Zeee LiPo by Connector and Capacity (Quality RC Parts, live post)
- LiPo Charge and Flight Time Tables With Worked Examples (Quality RC Parts, live post)
- Product listings linked in this guide, read live November 18, 2026, for specs, connector types, dimensions, weights, and prices.
