How to Fit DJI Mini 3 Pro Props and Guards
DJI Mini 3 Pro propellers screw on, so match the marked prop to the marked motor and the unmarked prop to the unmarked motor. Guards fit the same airframe but cut speed and range, and DJI caps takeoff altitude at 1500 m with guards on the standard battery. Props, guards, lens covers, and a case follow, from $7.14.
Quick facts
| Fact | Value |
|---|---|
| Takeoff weight | Under 249 g |
| Max flight time | 34 min, standard battery |
| Motors | 1504C brushless, 2824 KV |
| Prop mount | Screws, not quick release |
| Guard ceiling | 1500 m with standard battery |
| Lowest price here | $7.14 |
Which propellers fit the DJI Mini 3 Pro?
Mini 3 Pro props fit the Mini 3 Pro and the Mini 3. Both drones use screw-mounted props on 1504C motors.
Match marked props to marked motors and unmarked props to unmarked motors. DJI states this matching rule on its Mini 3 Pro support page.
A full set needs 2 CW and 2 CCW blades. The 8-piece sets in this guide hold 2 full sets of 4 blades.
Do propeller guards change how the Mini 3 Pro flies?
Guards cut top speed and flight range, per DJI support. The drone flies slower and shorter with guards fitted.
DJI caps takeoff altitude at 1500 m with guards on the standard battery. Do not fit guards with the Plus battery, per DJI.
Guards suit indoor flight and practice near people and walls. Remove them for long outdoor flights where range matters.
How do you fit a propeller guard?
Line the guard ring up with the motor arms and clip it over each arm. The ring must sit level around all 4 arms.
Check each clip by hand before takeoff. A loose clip can shift in flight and touch a blade.
Fly a short hover test after fitting guards. Listen for rubbing and land at once if you hear it.
What protects the camera lens?
A lens cover shields the gimbal lens in transit and storage. Fit it before the drone goes in a bag.
A lens cap covers the lens hood and keeps dust off the glass. It costs $7.80 in this guide.
Clean the lens with a microfiber cloth before you fit the cover. A trapped grain of sand can scratch the glass.
How do you store the Mini 3 Pro for travel?
A hard case holds the drone, the controller, and spare props in cut foam. It stops props bending in transit.
DJI states you do not need to remove the propellers for storage. Avoid bending or crushing them in the case.
Pack spare props flat, not bent. A bent blade vibrates and must be replaced.
What did we check on the bench?
We checked each listing in this guide against the DJI Mini 3 Pro specs page. The prop listings state Mini 3 and Mini 3 Pro fitment, and the guard listings state ring cages for the Mini 3 Pro.
We counted 8 blades in each 8-piece prop set, which gives 2 full sets of 4. The case listing states a hard shell box for the drone and accessories.
We matched the 1500 m guard ceiling and the screw-mount rule to the DJI support page, not to a seller claim.
How the options compare
| Part | Fits | Mount | Price |
|---|---|---|---|
| Propeller guard | Mini 3 Pro, Mini 3 | Ring cage | $17.98 |
| Propeller guard | Mini 3 Pro | Ring cage | $15.41 |
| Props, 8 pieces | Mini 3, Mini 3 Pro | Screw | $10.69 |
| Props, 8 pieces | Mini 3 Pro, Mini 3 | Screw | $7.14 |
| Props, 4 or 8 pieces | Mini 3 | Screw | $22.88 |
| Lens cover | Mini 3 | Clip-on | $8.67 |
| Lens cap | Mini 3 | Clip-on | $7.80 |
| Hard shell case | Mini 3, Mini 3 Pro | Box | $36.78 |
How do you change a Mini 3 Pro propeller?
- Power the drone off and remove the battery.
- Remove the screws from the damaged prop with a small Phillips driver.
- Fit the marked prop to the marked motor, or the unmarked prop to the unmarked motor.
- Tighten both screws snug, then spin the prop by hand to check it turns free.
- Refit the battery and run a short hover test before normal flight.
Parts that fit this guide
In-stock parts ship from the New York, USA warehouse in 1-2 business days. Prices below are the live store prices we verified on November 10, 2026.
Propeller Guard for DJI Mini 3 Pro/Mini 3 Propellers Protector Ring Protector Cage for Mini 3 Pro/Mini 3 ($17.98)
Ring guard at $17.98 for the Mini 3 Pro and Mini 3. It cages all 4 propellers against walls and branches.
Propeller Guard for DJI Mini 3 Pro Propellers Protector Wing Fan Protective Ring Protector Cage for Mini 3 ($15.41)
Ring guard at $15.41 for the Mini 3 Pro. It shields the blades during indoor flight and practice.
8X Precise&Flexible Propellers for DJI Mini 3/3 Pro Props Blade Replacement Light Weight Wing Fans Spare ($10.69)
8 propellers at $10.69 for the Mini 3 and Mini 3 Pro. Spare blades keep a bent prop from ending a flying day.
8pcs/set Propellers Blade for DJI Mini 3pro /mini 3 Drone Accessories ($7.14)
8 propellers at $7.14 for the Mini 3 Pro and Mini 3. The lowest price prop set in this guide.
4/8PCS Mini 3 drone with low-noise and screw propeller, suitable for DJI Mini 3 accessories ($22.88)
4 or 8 propellers at $22.88 for the Mini 3. Low-noise screw props with screws in the set.
Sunnylife Lens Cover for Mini 3 Lens Hood Sunshade Protective Cover Anti-glare Gimbal Camera Guard for DJI ($8.67)
Lens cover at $8.67 for the Mini 3. It shields the gimbal lens from glare and knocks in transit.
Mini 3 Drone Lens Cap Sunshade Protective Cover Gimbal Camera Lens Hood For DJI Mini 3 Accessories ($7.8)
Lens cap at $7.80 for the Mini 3. It covers the lens hood and keeps dust off the glass.
DJI Mini 3/ Mini 3Pro Case Explosion Proof Case Mini 3Pro Bag Portable Waterproof Box Hard Shell Large ($36.78)
Hard shell case at $36.78 for the Mini 3 and Mini 3 Pro. It holds the drone and accessories in a waterproof box.
Related parts: DJI 6030F Folding Carbon Propeller CW CCW Propellers For DJI Mini 3/Mini 3pro/Mini 4pro DJI Drone Accessories: Also fits this drone: 6030F folding carbon propellers for the Mini 3, Mini 3 Pro, and Mini 4 Pro..
Shop the full range: DJI Accessories at Quality RC Parts. See also: Related guide.
Frequently asked questions
Do Mini 3 Pro propellers fit the Mini 3?
Yes. Both drones use the same screw-mounted props on 1504C motors, and the listings in this guide state Mini 3 and Mini 3 Pro fitment.
Are Mini 3 Pro propellers quick release?
No. DJI states Mini 3 Pro propellers mount with screws, in the same way as DJI Mini 2 propellers. Match marked props to marked motors.
Do propeller guards fit with the Plus battery?
No. DJI states guards are not recommended with the Intelligent Flight Battery Plus, because the extra weight hurts propulsion.
Which guard should I buy first?
Buy the ring guard that lists your exact model. Both guards in this guide cage all 4 propellers, so pick by price and stock.
Sources
Last updated: November 10, 2026.