Description
Three short 1 ft (about 12 in) USB-A to USB-C cables for short-distance charging and data transfer. The cables support 3A fast charging with up to 18W max power and QC 3.0/2.0, with a 56K ohm pull-up resistor for safer charging current, and data transfer up to 480 Mbps over USB 2.0.
A nylon braided jacket, TPE jacket joint, and aluminum housing add durability, rated for over 10000 bending tests.
Specifications
- Quantity: 3 cables, 1 ft (0.3 m), braided
- Connectors: USB-A to USB-C
- Charging: 3A, up to 18W max, QC 3.0/2.0, 56K ohm pull-up resistor
- Data: up to 480 Mbps, USB 2.0
- Nylon braided, TPE joint, aluminum housing, over 10000 bend tests
In the box
Three 1 ft USB-A to USB-C cables.
How to use it
Plug the cable between a computer USB-A port and a USB-C development board to program and power it. Keep one cable at the bench, one with a power bank, and one spare.
Pairs with
USB-C ESP32 boards program and run over this cable. See HiLetgo ESP32 38-pin 3-pack.
Compare
The 5-pack adds two more cables for more boards and benches. Alternative: short USB-C cable 1ft 5-pack.
Full comparison: Breadboard prototyping essentials.
Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.









Reviews
There are no reviews yet.