Description
The Waveshare ESP32-C6 development board adopts the ESP32-C6-WROOM-1-N8 module with a RISC-V 32-bit single-core processor running up to 160 MHz and 8 MB of built-in flash. It integrates WiFi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication.
Rich peripherals include SPI, UART, I2C, I2S, LED PWM, and SDIO, with a pinout compatible with the ESP32-C6-DevKitC-1-N8 development board. Onboard CH343 and CH334 USB hub chips support USB and UART development at the same time through a USB-C port. Online examples and tutorials are provided for the ESP-IDF development environment.
Specifications
- Module: ESP32-C6-WROOM-1-N8, RISC-V 32-bit single-core up to 160 MHz, 8 MB flash
- Wireless: WiFi 6, Bluetooth 5, IEEE 802.15.4 (Zigbee 3.0 and Thread)
- Interfaces: SPI, UART, I2C, I2S, LED PWM, SDIO
- Pinout compatible with ESP32-C6-DevKitC-1-N8
- USB-C port, onboard CH343 and CH334 USB hub chips, USB and UART development at once
- Online examples and tutorials for ESP-IDF
In the box
One Waveshare ESP32-C6 development board.
How to use it
Start with the ESP-IDF examples: bring up WiFi 6 for a connected sensor, or run a Zigbee or Thread example for a mesh project. The USB-C port handles USB and UART development at the same time.
Pairs with
A breadboard and a short USB-C cable complete the bench setup. See ELEGOO 830-point breadboard 3-pack and short USB-C cable 1ft 2-pack.
Compare
The classic ESP32 3-pack covers standard WiFi and Bluetooth projects without WiFi 6 or Zigbee. Alternative: HiLetgo ESP32 38-pin 3-pack.
Full comparison: ESP32-C6 vs classic ESP32.
Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.








Reviews
There are no reviews yet.