LiPo Charger Choice: TP4056 vs B3 Pro vs B6neo

LiPo Charger Choice: TP4056 vs B3 Pro vs B6neo

LiPo charger choice depends on how many cells your packs have. A TP4056 module charges one lithium cell at 1A. A B3 Pro balance charger covers 2S and 3S LiPo packs. A B6neo smart charger covers 1 to 6 cells across several chemistries. Match the charger to the cell count first, then check power input and leads.

Last updated: November 18, 2026. Charger specs and prices in this guide were checked on that date. Prices are the effective prices shown on the live listings.

LiPo charger choice in one table

Charger Cell count on the listing Chemistries on the listing Charge current on the listing Power input on the listing Price checked November 18, 2026
TP4056 module One lithium cell Lithium cells 1A 5V micro USB $1.49 for 1 pack, $1.99 for 5 pack
ImaxRC B3 Pro 2S and 3S LiPo LiPo Not stated on the listing Not stated on the listing $15.99
B6neo 2 smart charger LiPo, LiFe, Li-ion, LiHV 1-6 cells; NiMH, NiCd 1-15 cells; Pb 3S and 6S LiPo, LiFe, Li-ion, LiHV, NiMH, NiCd, Pb 0.2-15.0A charge, 0.1-2.0A discharge DC 300W, 7-28V XT60; PD 80W max, 12-20V Type-C $84.99 US Plug variation, $99.99 B6neo2 Blue variation
B6 80W mini charger LiPo, Li-ion, LiFe 1-6 cells; NiMH, NiCd 1-15 cells LiPo, Li-ion, LiFe, NiMH, NiCd Not stated as an amp range on the listing; 80W power Power supply included $42.99

Read the table from left to right. If your packs are 4S or 6S, the B3 Pro cannot charge them, because its listing covers 2S and 3S only. If your work is single cells on a bench, the TP4056 module is the small tool for that job, and it cannot balance charge a multi-cell pack. If you run packs from 1S to 6S, the B6neo 2 or the B6 80W mini covers the range, and the choice between them comes down to power input, wattage, and price.

TP4056: one cell, 1A, USB input

The TP4056 module is a 5V micro USB charging module that charges one lithium cell at 1A. The listing describes it as handy for bench charging single cells and small DIY packs. It charges one cell only. It is not a balance charger, and it must never be used to charge a series pack as if it were a balance charger. A series pack needs a charger that reads each cell through a balance lead.

The module sells as a 1-pack for $1.49 and as a 5-pack for $1.99. The 5-pack works out to about $0.40 per module. Buy the 5-pack if you charge several single cells at once or want spares on the bench. Buy the single module if you need one for a single project. Either way, check the cell specification before you charge. A 1A charge current is 1C for a 1000mAh cell, and it is more than 1C for a smaller cell. Do not exceed the charge current your cell is rated for.

The TP4056 listing does not state a stop voltage, a protection circuit, or a load output. Do not assume those features are present. Check the module you receive, read the listing, and charge single cells where you can watch them. Never charge a lithium cell unattended. For the full single-cell basics, see TP4056 Charging Module: LiPo and Li-ion Basics Guide.

B3 Pro: 2S and 3S balance charging only

The ImaxRC B3 Pro Balance Charger (2S/3S) is a compact balance charger for 2S and 3S LiPo batteries, priced at $15.99. That is the whole specification on the listing. It does not state a charge current, a power rating, or a power input type. This guide does not fill those gaps with guesses. If you need the charge current or the input type before you buy, check the listing and the manual for the unit you will receive.

What the B3 Pro cannot do is clear from its listing. It cannot charge 4S, 5S, or 6S packs. It cannot charge single cells as a balance charger, since it covers 2S and 3S packs. Its listing names LiPo only, so do not use it for other chemistries unless the manual for your unit says otherwise. For a first RC car or plane running 2S or 3S packs, a 2S/3S balance charger covers the packs you own. The moment you add a 4S pack, you need a charger that covers 4S.

Example fits from the live packs in the companion connector guide: the Zeee 2S 2200mAh pack at $20.99 and the Zeee 3S 2200mAh pack at $23.99 both sit inside the B3 Pro cell range. The OVONIC 6S 5200mAh pack at $84.99 does not. Cell count is the hard limit. No setting on a 2S/3S charger makes it a 6S charger.

B6neo 2: the wide-range smart charger

The B6neo 2 Smart Charger, DC 300W / PD 80W is the wide-range option in this guide. Its listing names SKYRC as the brand and states DC 300W and USB PD 80W input, a built-in balance port, an XT60 DC input, and a Type-C PD input. It charges LiPo, LiFe, Li-ion, and LiHV packs at 1-6 cells, NiMH and NiCd packs at 1-15 cells, and Pb packs at 3S and 6S. Charge current runs 0.2-15.0A, discharge current runs 0.1-2.0A with a maximum of 24W on 6S, and balance current runs to a maximum of 550mA. The display is a 1.77 inch TN display at 128×160. Protection covers short circuit, overload, and reverse polarity.

Price depends on the variation. The US Plug variation (#7287) costs $84.99. The B6neo2 Blue variation (#7293) costs $99.99. Both variations were in stock when checked November 18, 2026. The listing does not state what differs between the variations beyond the variation name, so check the listing options before you order if the plug or color matters to you.

Power input matters as much as cell count. DC input runs 7-28V through an XT60 plug at up to 300W. PD input runs 12-20V through Type-C at up to 80W. A large pack at a 1C charge rate needs more than 80W, so PD input will cap the charge rate on large packs. See the wattage table below. If you charge 6S 5200mAh packs at 1C, plan on DC input. If you charge small packs, PD input covers them. The listing does not state that a DC power supply is included, so check what is in the box. The listing states the box holds the charger and the instruction manual.

B6 80W mini: power supply included

The B6 80W Mini LiPo Balance Charger and Discharger with Power Supply costs $42.99 and includes the power supply. It charges LiPo, Li-ion, and LiFe packs from 1 to 6 cells, and NiMH and NiCd packs from 1 to 15 cells. It covers fast charging, storage charging, data loading, and cycle charging and discharging. Charge leads are included with XT60, JST, and T connectors. Built-in protection covers short circuits, overcharging, overcurrent, and overheating, and the listing states a metal shell helps shed heat.

The B6 80W mini is the middle option in this guide: wider cell range than the B3 Pro, lower wattage and lower price than the B6neo 2, and a power supply in the box. Its listing does not state a charge current range in amps, so compare it on wattage and cell range, not on amps. At 80W, it faces the same large-pack limit as the B6neo 2 on PD input. A 6S 5200mAh pack at 1C needs more than 80W, so expect a slower charge rate on that pack with any 80W input.

Wattage: the limit buyers miss

Charge power in watts equals charge current times pack voltage. At a 1C rate, the current equals the capacity in amps, and the voltage rises to 4.2V per cell at the top of the charge. The table below multiplies the 1C current by the full pack voltage. These are arithmetic checks, not charger measurements.

Pack at 1C 1C current Full voltage Power at full voltage Fits 80W input?
2S 2200mAh 2.2A 8.4V 18.5W Yes
3S 2200mAh 2.2A 12.6V 27.7W Yes
4S 5200mAh 5.2A 16.8V 87.4W No, over 80W
6S 5200mAh 5.2A 25.2V 131.0W No, over 80W

The practical result is simple. Small packs charge fine on any input in this guide. Large 4S and 6S packs at 1C need more than 80W, so they need the B6neo 2 on DC input at up to 300W, or a slower charge rate on an 80W input. A slower rate is not a fault. It is the charger working inside its wattage limit. Check your charger display and manual for how it handles the wattage limit.

Balance leads and ports

Balance charging needs the balance lead connected as well as the main lead. The B6neo 2 listing states a built-in balance port. The B6 80W mini listing states charge leads with XT60, JST, and T connectors. The B3 Pro listing does not describe its ports in the fetched text, so check the unit before you buy balance accessories for it.

The 2S-6S JST-XH Balance Charging Adapter Board at $7.99 is a replacement balance board for chargers with XH style balance ports, covering 2S to 6S batteries with JST-XH balance plugs. Its listing names MEGA Power 860 and 960 chargers. Do not assume it fits the B6neo 2 or the B6 80W mini. Check your charger balance port type against the board type before you order. For balance lead basics, see How to Balance-Charge a LiPo Pack Without Guessing.

What each charger cannot do

Charger Cannot charge Why, from the listing
TP4056 module Multi-cell series packs as a balance charger Single-cell module at 1A; no balance function stated
B3 Pro 4S, 5S, 6S packs; chemistries other than LiPo Listing covers 2S/3S LiPo only
B6neo 2 on PD input Large packs at full 1C rate PD input capped at 80W; large packs at 1C need more
B6 80W mini Large packs at full 1C rate; LiHV packs 80W power; LiHV not named on the listing

Never charge a lithium pack unattended. Charge on a nonflammable surface, away from flammable material, and stop if a pack swells, gets hot, or smells wrong. The OVONIC pack listings state to stop charging when any cell reaches 4.2V and to use a LiPo balance charger only. The Zeee pack listings state to charge only with a LiPo-specific balance charger. Those listing instructions apply no matter which charger you pick.

Selection checklist

  • List every pack you own by cell count and chemistry. The charger must cover the highest cell count you own.
  • Single cells only: TP4056 module. Check the cell charge current rating against the 1A module current.
  • 2S and 3S LiPo only: B3 Pro covers the range. Check the listing for charge current and input type before you buy.
  • 1S to 6S mixed packs: B6neo 2 or B6 80W mini. Compare wattage, power input, and price.
  • Large 4S or 6S packs at 1C: plan on DC input at up to 300W, or accept a slower rate on 80W.
  • Check the leads: main plug type, balance port type, and whether a power supply is included.
  • Check the listing price and stock on the day you order. Prices in this guide were checked November 18, 2026.

Chargers and packs in this guide

All prices below are effective prices checked November 18, 2026. TP4056 5V Micro USB 1A Lithium Battery Charging Module (1 Pack) at $1.49. TP4056 5V Micro USB 1A Lithium Battery Charging Module (5 Pack) at $1.99. ImaxRC B3 Pro Balance Charger (2S/3S) at $15.99. B6neo 2 Smart Charger, DC 300W / PD 80W from $84.99. B6 80W Mini LiPo Balance Charger and Discharger with Power Supply, XT60, JST, and T Connectors at $42.99. 2S-6S JST-XH Balance Charging Adapter Board at $7.99. Example packs: Zeee 2S LiPo Battery, 2200mAh, 50C, 7.4V, Shorty, XT60 Connector, 1-Pack at $20.99, Zeee 3S LiPo Battery, 2200mAh, 50C, 11.1V, Shorty, T Connector, 1-Pack at $23.99, and OVONIC 6S LiPo Battery, 5200mAh, 130C, 22.2V, EC5 Connector, 1-Pack at $84.99. Browse the full range in Batteries & Chargers.

Related reading: TP4056 Charging Module: LiPo and Li-ion Basics Guide for single-cell basics, and LiPo Charge and Flight Time Tables With Worked Examples for charge time math.

Shipping

Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping. Check the live listing for the current price and stock before you order.

Frequently asked questions

Can a TP4056 charge a 2S pack?

No, not as a balance charger. The TP4056 module charges one lithium cell at 1A. A 2S pack needs a balance charger that reads each cell through the balance lead, such as the B3 Pro or the B6neo 2.

Can the B3 Pro charge a 4S pack?

No. The B3 Pro listing covers 2S and 3S LiPo batteries only. For 4S packs, use a charger that lists 4S in its cell range, such as the B6neo 2 or the B6 80W mini.

Why does my 6S pack charge slowly on a USB-C charger?

Wattage. A 6S 5200mAh pack at a 1C rate needs about 131W at full voltage by multiplication. A PD input capped at 80W cannot sustain that rate. Use DC input at up to 300W on the B6neo 2, or accept a slower rate.

Does the B6neo 2 include a power supply?

The listing states the box holds the charger and the instruction manual. It does not state that a DC power supply is included. Check the listing before you order, and plan your DC or PD input accordingly.

Which charger should a beginner buy first?

Buy for the packs you own. If you own only 2S and 3S LiPo packs, the B3 Pro covers them. If you own or plan to own 4S or 6S packs, buy a charger that covers 1-6 cells from the start so you do not buy twice.

Can I charge a pack faster than 1C?

Check the pack listing and the charger manual. Some pack listings state a suggested charge rate, and some state not to charge faster than 1C. This guide does not set a charge rate for any pack. Follow the listing and manual for your exact pack.

Sources