Description
TF-Luna single-point LiDAR range finder module for drones, robots, and Arduino projects. It measures distance from 0.2 to 8m using time of flight, with 1cm resolution and a 2-degree field of view. Frame rate is adjustable from 1 to 250Hz (100Hz default), so it keeps up with a fast moving drone or robot.
For drones, it is a light altitude hold and terrain following sensor at under 5g. It gives the flight controller a true height above ground for steady low hovering, landing, and obstacle avoidance. For robotics, it works for obstacle detection, level measurement, and smart device sensing.
Talk to it over UART (default) or I2C at 115200 baud with 3.3V LVTTL levels. Pin 1 is +5V, pin 2 is RXD/SDA, pin 3 is TXD/SCL, pin 4 is GND. Pin 5 selects the interface: ground it for I2C mode, leave it disconnected or at 3.3V for serial mode. Pin 6 is a multiplexing output (data ready signal in I2C mode).
Specs: operating range 0.2 to 8m; accuracy +/-6cm from 0.2 to 3m and +/-2 percent from 3 to 8m; range resolution 1cm; FOV 2 degrees; frame rate 1 to 250Hz adjustable; power consumption 0.5W or less; weight under 5g; dimensions 35 x 21.25 x 13.5mm; communication UART/I2C, 115200 baud, 3.3V LVTTL.
Included: 1 TF-Luna LiDAR module and 3 1.25mm 6P cables.
Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.











Reviews
There are no reviews yet.