Description
TFmini-S single-point ToF LiDAR range finder, the improved version of the TFmini. It measures distance from 0.1 to 12m with a blind zone of only 10cm, so it reads close objects the older TFmini missed. It uses a VCSEL light source at 850nm with a 2-degree field of view.
For drones, it is an altitude hold and obstacle avoidance sensor at 6.1g and 42 x 15 x 16mm. It gives the flight controller true height above ground for steady low hovering, terrain following, and landing. For robotics, it works for obstacle detection, level measurement, machine control, and safety sensing.
Talk to it over UART (default) or I2C, switchable by command, at 115200 baud, 8 data bits, 1 stop bit, no parity. Pin 1 is GND (black), pin 2 is +5V (red), pin 3 is RXD/SDA (white), pin 4 is TXD/SCL (green). Frame rate runs up to 100Hz and is adjustable from 1 to 1000Hz.
Specs: operating range 0.1 to 12m; maximum range at 10 percent reflectivity 5m; accuracy 1 percent under 6m and 2 percent from 6 to 12m; minimum resolution 5mm; frame rate 100Hz (1 to 1000Hz adjustable); FOV 2 degrees; light source VCSEL, 850nm; power supply 4.5 to 6V; average power 0.12W; light sensitivity 70,000 lux; operating temperature 20 to 60C; size 42 x 15 x 16mm; weight 6.1g.
Included: 1 TFmini-S LiDAR range finder sensor and 2 cables.
Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.











Reviews
There are no reviews yet.