How to Choose a Skywalker ESC by Amps and Connector

Match the ESC amperage to your motor and battery, then match the connector to your pack. The Skywalker 20A at $13.99 suits small planes on a T-connector. The 15A V2 at $17.99 suits micro models at 10 g. The 40A V2 at $22.99 suits sport planes on 3 to 4S, with an XT60 plug pre-soldered.

Quick facts

Fact	Value
20A Skywalker	T-connector, $13.99
15A V2	2-3S, 5V 2A linear BEC, 10 g, $17.99
40A V2	3-4S, 5V 5A switch-mode BEC, XT60, $22.99
Range	15A to 80A across the V2 range
Connectors	T-connector, XT60, and EC5 versions
Use	Sport planes, EDF jets, and trainers

What does the amperage number mean?

ESC amperage states the continuous current the speed controller can carry to one motor.

The 20A version carries 20A, the 15A V2 carries 15A, and the 40A V2 carries 40A with a 60A burst.

Pick the amperage for your motor and battery, not for the plane size alone.

Which connector fits your battery?

The 20A version uses a T-connector, and the 40A V2 version uses an XT60 connector.

The 80A V2 also comes with an EC5 connector, so the range covers three plug types.

Match the connector to your battery pack, because the plugs come pre-soldered.

Linear or switch-mode BEC?

A BEC feeds 5V power from the ESC to your receiver and servos.

The 15A V2 uses a linear BEC at 5V and 2A, which suits a receiver and a couple of micro servos.

The 40A V2 uses a switch-mode BEC at 5V and 5A, which runs cool while feeding digital servos.

What about the FlyFun and SimonK ESCs?

The FlyFun 12A ESC suits small foamies and park flyers on 2 to 4S, at 13 g.

The 30A multi-rotor ESC runs SimonK firmware for fast throttle response on 2 to 4S quads.

The 40A brushless ESC with an XT60 plug suits 2 to 3S sport planes and trainers.

What did we check on the bench?

We matched the 15A, 20A, and 40A ratings and the connector types to their listings.

We counted 8 amperage steps across the ESCs in this guide: 12A, 15A, 20A, 30A, 40A, 50A, 60A, and 80A.

We matched the 5V 2A linear BEC and the 5V 5A switch-mode BEC to the V2 listings.

How the options compare

ESC	Amps	Input	BEC	Connector	Price
Skywalker 20A	20A	Not stated	Not stated	T-connector	$13.99
Skywalker 40A V2	40A	3-4S	5V 5A switch-mode	XT60	$22.99
Skywalker 15A V2	15A	2-3S	5V 2A linear	Not stated	$17.99

How do you pick a plane ESC in 4 steps?

1. Note your motor draw and battery cell count.
2. Pick the amperage band for that motor and battery.
3. Match the connector to your battery pack.
4. Check the BEC covers your receiver and servos.

Parts that fit this guide

In-stock parts ship from the New York, USA warehouse in 1-2 business days. Prices below are the live store prices we verified on November 11, 2026.

Skywalker 20A (T-Connector) ($13.99)

Skywalker 20A at $13.99. It is a Hobbywing Skywalker speed controller with a T-connector battery plug for small planes.

Skywalker 40A V2 (XT60-Connector) ($22.99)

Skywalker 40A V2 at $22.99. It carries 40A continuous with a 60A burst on 3 to 4S, with a 5V 5A switch-mode BEC and an XT60 plug pre-soldered.

Skywalker 15A V2 ($17.99)

Skywalker 15A V2 at $17.99. It carries 15A continuous on 2 to 3S, with a 5V 2A linear BEC, and it weighs 10 g.

Related parts: Skywalker 40A V2 (T-Connector): Skywalker 40A V2 with a T-connector battery plug.; Skywalker 50A V2 (XT60-Connector): Skywalker 50A V2 with an XT60 connector.; Skywalker 60A V2 (XT60-Connector): Skywalker 60A V2 with an XT60 connector.; Skywalker 50A V2 (T-Connector): Skywalker 50A V2 with a T-connector, 50A continuous with a 70A peak on 3 to 4S.; Skywalker 60A V2 (T-Connector): Skywalker 60A V2 with a T-connector, 60A continuous with an 80A burst on 3 to 6S.; Skywalker 80A V2 (T-Connector): Skywalker 80A V2 with a T-connector, 80A continuous with a 100A burst on 2 to 6S.; Skywalker 80A V2 (EC5 Connector): Skywalker 80A V2 with an EC5 connector, 80A continuous with a 100A burst on 3 to 6S.; FlyFun 12A ESC: FlyFun 12A ESC, 12A continuous with a 15A burst on 2 to 4S, at 13 g.; 30A Brushless Multi-Rotor ESC with SimonK Firmware (2-4S LiPOs): GForce 30A multi-rotor ESC with SimonK firmware, for quad builds on 2 to 4S.; 40A Brushless ESC (XT60): GForce 40A brushless ESC with an XT60 plug, 40A continuous with a 55A burst on 2 to 3S..

Shop the full range: Plane Parts and Hardware at Quality RC Parts. See also: Related guide.

Frequently asked questions

Can I use a T-connector ESC with an XT60 battery?

No, not as listed. Match the connector to your battery, or fit an adapter. The V2 range covers T-connector, XT60, and EC5 versions.

What does the BEC do?

It feeds 5V power from the ESC to your receiver and servos. Check the BEC amps cover your servos.

Is 40A enough for a sport plane?

It depends on the motor draw. The 40A V2 carries 40A continuous with a 60A burst, which suits most sport planes on 3 to 4S.

Can I use a plane ESC on a quad?

No, not this type. Plane ESCs drive one motor each. Quads use 4-in-1 ESCs or four single ESCs with multi-rotor firmware.

Sources

• Hobbywing
• Oscar Liang ESC guide
• Betaflight

Last updated: November 11, 2026.

How to Wire an RC Receiver Switch with a JR Futaba Plug

An RC receiver switch cuts power with a flick, so you never unplug the battery to stop the model. The JR to JST switch at $6.99 fits Futaba and JR systems in 2-wire and 3-wire versions. The JST to JST-XH adapter set at $5.99 covers 2S through 6S packs on a standard balance charger, over 20AWG wire.

Quick facts

Fact	Value
Switch	JR to JST, 2 and 3 wire, $6.99
Switch fits	Futaba and JR systems
Adapter	JST male to JST-XH, 2S-6S, $5.99
Adapter wire	20AWG throughout
Switch versions	4 configurations
Use	RC cars, boats, and planes

What does the JR to JST switch do?

The switch sits between the battery and the receiver, and it cuts power with a flick.

You stop the model without unplugging the battery, which saves wear on the connectors.

The switch at $6.99 fits Futaba and JR systems, for RC cars, boats, and planes.

Which switch version fits your receiver?

The listing offers 4 configurations: JR to JST, JR 2-wire, JR 3-wire, and JST 2-wire.

A 2-wire switch carries power only, while a 3-wire switch adds a signal wire.

Pick the version that matches the plug on your receiver and battery.

How does the JST to JST-XH adapter help?

The adapter set turns a JST male balance tap into a JST-XH plug.

It covers 2S through 6S packs, so one set charges every common pack size.

The wire measures 20AWG throughout, so it suits standard balance charging.

How do balance connector savers help?

A balance connector saver plugs onto your battery balance lead and gives you a bigger grip.

The bigger grip means you pull the saver, not the wires, so the leads last longer.

The 2S and 4S savers come in 5-packs, so one pack covers several batteries.

What did we check on the bench?

We matched the 4 switch configurations to the JR to JST switch listing.

We matched the 2S to 6S range and the 20AWG wire to the adapter listing.

We counted 1 image on the switch listing and 2 images on the adapter listing.

How the options compare

Part	From	To	Covers	Price
Receiver switch	JR or Futaba	JST	2-wire and 3-wire	$6.99
Balance adapter	JST male	JST-XH	2S-6S	$5.99

How do you wire a receiver switch?

1. Pick the switch version for your receiver plug.
2. Plug the battery lead into the switch input.
3. Plug the switch output into the receiver.
4. Mount the switch where you can reach it on the model.
5. Flick the switch and check the receiver powers off.

Parts that fit this guide

In-stock parts ship from the New York, USA warehouse in 1-2 business days. Prices below are the live store prices we verified on November 11, 2026.

JR/Futaba to JST Switch Connector, 2 and 3 Wire ($6.99)

JR to JST switch connector at $6.99. It is an RC receiver power switch for Futaba and JR systems, in 2-wire and 3-wire versions for cars, boats, and planes.

JST to JST-XH Balance Adapter Set, 2S-6S ($5.99)

JST to JST-XH balance adapter set at $5.99. It adapts JST balance taps to JST-XH chargers across 2S to 6S, over 20AWG wire.

Related parts: 2S JST-XH Balance Connector Saver, 5-Pack: 2S JST-XH balance connector saver, 5-pack, with a bigger grip for your battery leads.; 4S JST-XH Balance Connector Saver, 5-Pack: 4S JST-XH balance connector saver, 5-pack, sized for 4S balance plugs..

Shop the full range: Connectors and Wiring at Quality RC Parts. See also: Related guide.

Frequently asked questions

Do I need a switch on every model?

No. A switch suits models where the battery stays plugged in between runs. Unplug the battery for storage.

What is the difference between 2-wire and 3-wire?

A 2-wire switch carries power only. A 3-wire switch adds a signal wire. Match the version to your receiver.

Will the adapter fit my charger?

It fits chargers with a JST-XH balance port. It covers 2S through 6S packs.

Can I leave the battery plugged in with the switch off?

No, not for storage. A switch cuts power to the receiver, but it does not replace unplugging the battery for storage.

Sources

• SparkFun connector basics
• JST connector
• Futaba USA

Last updated: November 11, 2026.

How to Choose a Waterproof Servo for RC Cars and Boats

A waterproof servo keeps steering when the run gets wet. The 20KG servo at $53.99 suits 1:10 and 1:8 rigs. The metal gear servo at $49.99 spans 20 to 40 kg across 14 models, with 180 or 270 degree travel. The Perfex KS-201 at $8.60 suits light duty, with 3 to 4.5 kg per cm of torque.

Quick facts

Fact	Value
20KG servo	20 kg torque, standard size, $53.99
Metal gear servo	20 to 40 kg, 14 models, $49.99
Rotation	180 or 270 degrees on the metal gear range
Perfex KS-201	3 to 4.5 kg per cm, 42 g, $8.60
Spline	25T on the 20KG and metal gear servos
Use	1:10 and 1:8 rigs, rudders, wet jobs

What makes a servo waterproof?

A waterproof servo seals its case, so mud, rain, and snow stay out of the gears and electronics.

The 20KG servo listing states a sealed waterproof case in standard size.

A sealed case suits steering on 1:10 and 1:8 rigs, rudders, and any job that gets wet.

20 kg or 20 to 40 kg?

The 20KG servo gives a fixed 20 kg of torque in a standard size case.

The metal gear servo spans 20 to 40 kg across 14 models, so you pick the torque for the rig.

Both servos use a 25T spline output, so the same servo arms fit either one.

180 or 270 degrees?

The metal gear range offers 180 or 270 degree rotation, so you pick the travel for the job.

A 180 degree servo suits steering, while a 270 degree servo suits a winch or a wide-travel linkage.

The metal gear servo measures 40.0 x 20.5 x 40.5 mm and weighs 58 g.

Where does the Perfex KS-201 fit?

The Perfex KS-201 suits light duty, with 3 to 4.5 kg per cm of torque.

It measures 40.5 x 20 x 36.5 mm and weighs 42 g, so it stays light on the build.

Pick it for a small plane or car where a full waterproof servo is more than the job needs.

What did we check on the bench?

We matched the 20 kg torque and the 25T spline to the 20KG servo listing.

We matched the 14 models, the 180 and 270 degree options, and the 58 g weight to the metal gear servo listing.

We matched the 3 to 4.5 kg per cm torque and the 42 g weight to the Perfex KS-201 listing.

How the options compare

Servo	Torque	Rotation	Size	Price
20KG waterproof	20 kg	Not stated	40x20x38 mm	$53.99
Metal gear range	20-40 kg	180 or 270 deg	40.0×20.5×40.5 mm	$49.99
Perfex KS-201	3-4.5 kg/cm	Not stated	40.5x20x36.5 mm	$8.60

How do you fit a waterproof servo?

1. Pick the torque and rotation for the job.
2. Fit the servo in the mount and check the spline lines up.
3. Fit a 25T servo arm to the spline.
4. Center the servo with your radio before you link it up.
5. Test the full travel by hand before you run the model.

Parts that fit this guide

Parts in this guide ship from the New York, USA warehouse. The 20KG servo listing notes distributor fulfillment can take up to 14 days, so allow extra time. Prices below are the live store prices we verified on November 11, 2026.

20KG Waterproof Digital Servo ($53.99)

20KG waterproof digital servo at $53.99. It is a standard size servo with a sealed case and a 25T spline, for 1:10 and 1:8 rigs and rudders.

Waterproof Digital Servo, 20-40kg, Metal Gear, 180 / 270 Degree ($49.99)

Waterproof digital servo at $49.99. It has metal gears, 20 to 40 kg of torque across 14 models, and 180 or 270 degree travel.

Perfex KS-201 Standard Servo ($8.60)

Perfex KS-201 standard servo at $8.60. It gives 3 to 4.5 kg per cm of torque in a 42 g case for light duty work.

Related parts: JR/Futaba to JST Switch Connector, 2 and 3 Wire: JR to JST receiver power switch, for the same cars, boats, and planes these servos steer..

Shop the full range: Servos at Quality RC Parts. See also: Related guide.

Frequently asked questions

Is the Perfex KS-201 waterproof?

No. The listing does not state a sealed case. Pick the 20KG servo at $53.99 or the metal gear servo at $49.99 for wet runs.

What does 25T mean?

It means the output spline has 25 teeth. Fit a 25T servo arm to it.

Can I use a waterproof servo in a plane?

Yes, when the size and torque fit. The 20KG servo suits rudders and any job that gets wet.

How do I pick between 180 and 270 degrees?

Pick 180 degrees for steering and 270 degrees for a winch or a wide-travel linkage.

Sources

• Adafruit servo motors lesson
• SparkFun hobby servo tutorial
• Futaba USA

Last updated: November 11, 2026.

How to Soft Mount a Flight Controller with Rubber Grommets

Rubber soft mount grommets at $2.99 for 10 pieces sit between your flight controller and the frame. They stop motor vibration before it reaches the gyro. The F722 Mini flight controller at $53.47 mounts on a 20×20 pattern and runs 3 to 6S. Fit M2 or M3 grommets to match your board holes, then check the gyro noise in Betaflight.

Quick facts

Fact	Value
Grommets	10 pieces, rubber, $2.99
Sizes	M2 and M3
Heights	5.6, 6.6, and 8 mm
Fits	F3, F4, and F7 flight controllers
Flight controller	F722 Mini, 20×20, 3-6S, $53.47
Gyro	ICM42688 on the F722 Mini

Why soft mount a flight controller?

Motors shake the frame, and that vibration reaches the gyro on the flight controller.

Rubber grommets sit between the board and the frame, so they soak up vibration before it reaches the gyro.

Clean gyro data means steadier flight, so a $2.99 pack of grommets is cheap insurance.

M2 or M3 grommets?

Match the grommet size to the mounting holes on your flight controller board.

The pack covers M2 and M3 sizes, with heights of 5.6, 6.6, and 8 mm across the options.

The listing offers 13 size and color options, so pick the size and height for your board.

How many grommets does a board need?

A board mounts on 4 grommets, one at each corner of the mounting pattern.

A 10-piece pack covers two boards with 2 spares left over.

Keep spares in the kit, because a torn grommet lets vibration straight through.

Which flight controller pairs with them?

The F722 Mini flight controller at $53.47 mounts on a 20×20 pattern and runs 3 to 6S.

It carries an ICM42688 gyro, which reads clean data when the board sits on soft mounts.

The listing states flight controller only, so add an ESC when you build with it.

What did we check on the bench?

We counted 13 size and color options on the grommet listing, across M2 and M3 sizes.

We matched the 10-piece count and the F3, F4, and F7 fitment to the listing.

We matched the 20×20 mount, 3 to 6S range, and ICM42688 gyro to the F722 Mini listing.

How the options compare

Size	Heights	Colors	Pieces	Price
M2 grommets	H5.6, H6.6	Red, blue, black	10	$2.99
M3 grommets	H6.6, H8	Yellow, red, blue, black	10	$2.99

How do you fit soft mount grommets?

1. Remove the flight controller screws and lift the board.
2. Push a grommet into each mounting hole.
3. Set the board back on the frame over the grommets.
4. Refit the screws snug, and do not crush the rubber.
5. Check the gyro noise in Betaflight before you fly.

Parts that fit this guide

In-stock parts ship from the New York, USA warehouse in 1-2 business days. Prices below are the live store prices we verified on November 11, 2026.

M2/M3 Rubber Flight Controller Soft Mount Grommets, 10 Pieces ($2.99)

Rubber soft mount grommets at $2.99 for 10 pieces. They are M2 and M3 rubber damper balls for F3, F4, and F7 flight controllers on FPV quads.

F722 Mini Flight Controller Only, 20×20, 3-6S ($53.47)

F722 Mini flight controller at $53.47. It is a 20×20 board for 3 to 6S with an ICM42688 gyro, and no ESC is included.

Related parts: F722 Mini Flight Controller Stack with 55A 4-in-1 ESC, 20×20, 3-6S: F722 Mini stack with a 55A 4-in-1 ESC on a 20×20 mount, for 3 to 6S.; Taker F722 BT Flight Controller with 45A 4in1 ESC: Taker F722 BT stack with a 45A 4-in-1 ESC and Bluetooth for wireless setup..

Shop the full range: Flight Controllers and ESCs at Quality RC Parts. See also: Related guide.

Frequently asked questions

Do soft mounts fit every flight controller?

No. They fit F3, F4, and F7 boards with M2 or M3 mounting holes. Check your board holes before you order.

How tight should the screws be?

Snug only. Crushed rubber stops damping vibration, so stop when the grommet holds its shape.

Can I reuse old grommets?

Check them first. A torn or flat grommet lets vibration through, so replace any that lost their shape.

Does the F722 Mini include an ESC?

No. The $53.47 listing is the flight controller only. Add an ESC, or buy the stack version with a 55A ESC.

Sources

• ArduPilot measuring vibration
• Betaflight
• Oscar Liang FPV drone frames guide

Last updated: November 11, 2026.

How to Convert Analog FPV Video to USB on a Computer

The CVBS to USB converter at $25.99 turns an FPV camera signal into USB video. It works on a PC, Linux board, or Android device, with no drivers to install. It outputs 720 or 1080 video in YUV422 or MJPEG format. The 3-channel switcher at $2.99 flips between three cameras on one feed, using a PWM channel from your receiver.

Quick facts

Fact	Value
Converter output	720 or 1080 video, YUV422 or MJPEG
Converter size	25 x 12 mm PCB module
Converter price	$25.99
Switcher channels	3 cameras on one feed
Switcher power	DC 5-12V, PWM control
Switcher price	$2.99

How does the converter turn analog video into USB?

The converter takes a CVBS analog signal and outputs standard UVC video over USB.

It outputs 720 or 1080 video in YUV422 or MJPEG format, per its listing.

UVC means the device needs no drivers on Linux, Android, and MacOS. Plug it in and the video shows up.

Which cameras feed it?

Any analog FPV camera with a CVBS output feeds the converter.

The Ant Nano camera lists a CVBS video output, 1200TVL resolution, and a 14×14 mm size.

The converter module measures 25 x 12 mm, so it fits a small build or a bench rig.

How do you switch between three cameras?

The switcher takes three camera inputs and sends one video feed to the transmitter.

A PWM channel from your receiver controls it, so a 3-position switch flips views with no latency.

The control steps are 1000, 1500, and 2000 microseconds, one step per camera.

What do you need on the computer side?

You need a device that reads UVC video: a PC, a Linux board, or an Android device.

The listing states driver-free use on Linux, Android, and MacOS.

Open any app that reads a USB camera, and the analog feed shows as a webcam.

What did we check on the bench?

We matched the 720 and 1080 outputs, YUV422 and MJPEG formats, and the 25 x 12 mm size to the converter listing.

We matched the 3 channels, 5 to 12V power, and the PWM control steps to the switcher listing.

We counted 1 image on each listing, and the switcher listing shows the pre-soldered pins.

How the options compare

Part	Input	Output	Power	Price
CVBS to USB converter	CVBS analog	USB 720 or 1080	USB	$25.99
3-channel switcher	3 cameras	1 video feed	5-12V	$2.99

How do you view an FPV camera on a computer?

1. Connect the analog camera output to the converter input.
2. Plug the converter into a USB port on your computer.
3. Open an app that reads a USB camera.
4. Check the video shows at 720 or 1080.
5. Add the switcher between three cameras and one feed when you need more views.

Parts that fit this guide

In-stock parts ship from the New York, USA warehouse in 1-2 business days. Prices below are the live store prices we verified on November 11, 2026.

CVBS to USB AV Signal Converter, 1080P Camera Module, YUV422/MJPEG ($25.99)

CVBS to USB converter at $25.99. It turns an analog FPV camera signal into USB video at 720 or 1080, with YUV422 or MJPEG output and no drivers needed.

DC 5-12V 3-Channel Video Switcher Module for FPV Cameras ($2.99)

3-channel video switcher at $2.99. It flips between three FPV cameras on one feed, controlled by a PWM channel, and runs on 5 to 12V.

Related parts: Ant Nano 1200TVL Global WDR OSD 1.8mm Ultra Light FPV Camera: Ant Nano 1200TVL FPV camera with a CVBS output, 2 grams, for tinywhoop and cinewhoop builds..

Shop the full range: FPV Cameras at Quality RC Parts. See also: Related guide.

Frequently asked questions

Does the converter work on Windows?

The listing states driver-free use on Linux, Android, and MacOS. It does not state Windows, so test it on your system before you rely on it.

What resolution does it output?

It outputs 720 or 1080 video, in YUV422 or MJPEG format.

Can the switcher flip cameras in flight?

Yes. A PWM channel from your receiver flips views with no latency, so a 3-position switch changes the camera in flight.

How many cameras can the switcher take?

It takes 3 cameras on one video feed. The control steps are 1000, 1500, and 2000 microseconds.

Sources

• Oscar Liang FPV camera guide
• USB video device class
• Caddx FPV cameras

Last updated: November 11, 2026.

How to Choose a Bluetooth Flight Controller Stack for FPV

The GEPRC Taker F722 BT stack at $164.99 suits a 5-inch freestyle build. It pairs an F722 flight controller with a 45A 4-in-1 ESC and adds Bluetooth for wireless Betaflight setup. The F722 Mini stack at $87.71 suits a tight 3-inch build, with a 55A ESC on a 20×20 mount. Both run Betaflight on 3 to 6S.

Quick facts

Fact	Value
Taker stack	F722, 45A 4-in-1 ESC, Bluetooth, $164.99
F722 Mini stack	F722 Mini, 55A 4-in-1 ESC, 20×20, $87.71
Firmware	Betaflight, both stacks
Battery	3 to 6S LiPo, both stacks
Gyro	ICM42688 on the F722 Mini
Use	5-inch freestyle, or tight 3-inch builds

What does Bluetooth change on the Taker stack?

Bluetooth lets you change Betaflight settings from a phone or tablet, with no USB cable to the quad.

The Taker F722 BT listing states Bluetooth wireless Betaflight setup as a feature.

You still need a USB cable for firmware updates, but daily tuning works over Bluetooth.

F722 Mini stack or Taker stack?

The Taker stack costs $164.99 and pairs an F722 flight controller with a 45A 4-in-1 ESC.

The F722 Mini stack costs $87.71 and pairs an F722 Mini flight controller with a 55A 4-in-1 ESC on a 20×20 mount.

The Taker listing states no mount size, so check the board holes against your frame before you order.

What does 45A vs 55A mean in flight?

ESC amperage states how much current each motor channel can carry.

A 55A ESC carries more current than a 45A ESC, so it suits larger motors and higher cell counts.

Pick the amperage for your motors and battery, not for the frame size alone.

Which stack fits a 3-inch build?

The F722 Mini stack fits a tight 3-inch build, because its 20×20 mount suits small frames.

The Taker stack suits a 5-inch freestyle build, per its listing.

Match the mount size to your frame before you order either stack.

What did we check on the bench?

We matched Bluetooth and the 45A 4-in-1 ESC to the Taker F722 BT listing.

We matched the 55A ESC, the 20×20 mount, 3 to 6S, and the ICM42688 gyro to the F722 Mini listing.

We counted 1 image on each listing, and both listings show the stack from one angle.

How the options compare

Stack	Flight controller	ESC	Mount	Bluetooth	Price
Taker F722 BT	F722	45A 4-in-1	Not stated	Yes	$164.99
F722 Mini	F722 Mini	55A 4-in-1	20×20	Not stated	$87.71

How do you set up the Taker stack over Bluetooth?

1. Solder the stack and fit it to the frame.
2. Power the quad and open Betaflight on your phone or tablet.
3. Connect over Bluetooth and check the receiver link.
4. Set the motor direction and check each motor spins.
5. Run a short hover test before normal flight.

Parts that fit this guide

In-stock parts ship from the New York, USA warehouse in 1-2 business days. Prices below are the live store prices we verified on November 11, 2026.

Taker F722 BT Flight Controller with 45A 4in1 ESC ($164.99)

Taker F722 BT stack at $164.99. It pairs a GEPRC F722 flight controller with a 45A 4-in-1 ESC and adds Bluetooth for wireless Betaflight setup.

F722 Mini Flight Controller Stack with 55A 4-in-1 ESC, 20×20, 3-6S ($87.71)

F722 Mini stack at $87.71. It pairs an F722 Mini flight controller with a 55A 4-in-1 ESC on a 20×20 mount, for 3 to 6S.

Related parts: F722 Mini Flight Controller Only, 20×20, 3-6S: F722 Mini flight controller only, 20×20, 3 to 6S, with no ESC included.; UAngel F722 F7 Flight Controller Stack with 45A/60A 4-in-1 ESC and VTX1000 for FPV Racing: UAngel F722 stack with a 45A or 60A 4-in-1 ESC and a VTX1000..

Shop the full range: Flight Controllers and ESCs at Quality RC Parts. See also: Related guide.

Frequently asked questions

Does the Taker stack need a USB cable?

No, not for daily tuning. Bluetooth handles Betaflight setup. Use USB for firmware updates.

Can the F722 Mini stack run 6S?

Yes. The F722 Mini stack lists 3 to 6S LiPo, so it covers 6S builds.

Does either stack include motors?

No. Both stacks are a flight controller plus an ESC only. Add motors, a receiver, and a battery.

Which stack suits a first 5-inch build?

The Taker stack at $164.99 suits a 5-inch freestyle build, per its listing. The F722 Mini at $87.71 suits a tight 3-inch build.

Sources

• GEPRC
• Betaflight
• ExpressLRS getting started

Last updated: November 11, 2026.

How to Build a Large Camera Drone on the ZD550 V3 Frame

The ZD550 V3 frame kit at $112.99 suits a camera or mapping build. It bundles a 550 mm frame with tall landing gear and a power distribution board. The 4mm HD combo at $89.99 suits heavy payloads, with thicker arms and plates. Both kits ship as frame-only builds, so you add motors, a flight controller, and a battery.

Quick facts

Fact	Value
Wheelbase	550 mm, both combos
Combo with gear and PDB	ZD550 V3 frame kit, $112.99
HD combo	4 mm arms and plates, $89.99
Landing gear	Tall, for camera clearance
Hardware kit	Full kit included with the HD combo
Type	Frame only, add motors and electronics

What comes in each ZD550 V3 combo?

The $112.99 combo bundles the ZD550 V3 550 mm frame kit with tall landing gear and a power distribution board.

The $89.99 HD combo is the ZD550 V3 frame with thicker 4 mm arms and plates for heavy-duty 550 mm builds.

Both combos are frame kits only, so you add motors, a flight controller, an ESC set, and a battery.

Why pick the tall landing gear version?

Tall landing gear gives a camera clearance under the frame, so the lens clears the ground on takeoff and landing.

The tall gear version suits a camera or mapping build, where the camera hangs below the frame.

The combo includes the power distribution board, so power wiring starts from one board.

What does 4mm HD change?

The HD combo uses 4 mm arms and plates, which are thicker than a standard frame kit.

Thicker arms and plates carry real payload weight on a 550 mm build.

Pick the HD combo when the build carries a camera, a gimbal, or mapping gear.

Frame kit or full combo?

A frame kit gives you the airframe only, and you pick every motor and electronic part.

The F450 combo in the related parts below adds four 2212 920KV motors and four 30A ESCs to a 450 mm frame.

A 550 mm frame carries more payload than a 450 mm frame, so pick the size for the camera you fly.

What did we check on the bench?

We matched the 550 mm wheelbase and the tall landing gear plus PDB to the $112.99 combo listing.

We matched the 4 mm arm thickness and the 550 mm wheelbase to the $89.99 HD combo listing.

We counted 1 image on each listing, and both listings show the frame kit from one angle.

How the options compare

Combo	Wheelbase	Arms	Includes	Price
ZD550 V3 frame kit	550 mm	Not stated	Frame, tall gear, PDB	$112.99
ZD550 V3 4mm HD	550 mm	4 mm	Frame, full hardware kit	$89.99

How do you start a ZD550 V3 build?

1. Pick the combo for your payload: tall gear with PDB, or 4 mm HD for heavy loads.
2. Pick motors and ESCs sized for a 550 mm frame.
3. Pick a flight controller and a battery for the build.
4. Fit the landing gear first, so the camera clears the ground.
5. Check prop clearance by hand before the first flight.

Parts that fit this guide

Parts in this guide ship from the New York, USA warehouse. The ZD550 listings note distributor fulfillment can take up to 14 days, so allow extra time. Prices below are the live store prices we verified on November 11, 2026.

ZD550 V3 Frame with Landing Gear and PDB Combo ($112.99)

ZD550 V3 frame kit at $112.99. It is a 550 mm frame kit with tall landing gear and a power distribution board for camera or mapping builds.

ZD550 V3 4mm HD Combo ($89.99)

ZD550 V3 4mm HD combo at $89.99. It is a 550 mm frame with thicker 4 mm arms and plates for heavy-duty builds that carry real payload weight.

Related parts: F450 Frame with 2212 920KV Motors and 30A ESCs Combo: F450 450 mm frame kit with four 2212 920KV motors and four 30A ESCs.; 2212 920KV Brushless Motors, 4-Pack: 2212 920KV brushless motors, matched 4-pack for 450 class quadcopters..

Shop the full range: Large Frames and Motors at Quality RC Parts. See also: Related guide.

Frequently asked questions

Does the ZD550 V3 combo include motors?

No. Both combos are frame kits only. Add motors, a flight controller, ESCs, and a battery.

Which combo suits a camera build?

The $112.99 combo suits a camera build, because the tall landing gear gives the camera clearance and the PDB is included.

What does 4mm HD mean?

It means the arms and plates measure 4 mm thick, for heavy-duty builds that carry real payload weight.

Do I need to register a 550 mm drone?

Yes, in most cases. A 550 mm camera build weighs over 250 g, so the FAA registration rule applies. Check the FAA recreational flyers page before you fly.

Sources

• Oscar Liang FPV drone frames guide
• Betaflight
• FAA recreational flyers

Last updated: November 11, 2026.

How to Budget Your First FPV Drone Build, Part by Part

A 5-inch FPV build starts with the frame, stack, motors, camera, video transmitter, receiver, and props. Current live prices in this guide run from $5.65 for a camera mount upward. A parts list totals in the low hundreds before batteries and goggles. Pick the frame first, then match every part to it.

Quick facts

Fact	Value
Frame from	APEX 2-inch frame, $19.57
Stack from	F722 Mini stack, $47.63
Motors from	1503 4-pack, $9.23
Camera from	Ant Nano, $52.99
VTX from	Tiny Tank Nano, $11.55
Receiver from	ER4 ELRS receiver, $53.99
Lowest part here	Camera mount, $5.65

What does a build cost by part?

The table below lists one live part per category with its current price.

The 10 parts in the table total $339.23 at the live prices shown.

That total includes a charger and a radio. It leaves out batteries, goggles, and props, which you add on top.

Which parts changed price?

The store repriced 101 products across the November 9 and 10 pricing passes.

95 of those 101 products are live in the store, and the parts in this guide come from that set.

Every price below is the live store price we verified on November 10, 2026.

Why pick the frame first?

The frame sets the prop size, the stack mount size, and the motor size.

A 5-inch frame takes 5-inch props and a 30×30 stack, while a 2-inch frame takes smaller parts.

Pick the frame, then match the stack, motors, camera, and video transmitter to it.

Where do you save money?

Buy a stack instead of a flight controller and ESC apart.

The F722 Mini stack costs $87.71, while its FC-only board is $53.47 and its 55A ESC-only is $47.63, which total $101.10.

The stack saves $13.39 against the two parts apart, at the live prices shown.

What did we check on the bench?

We pulled the live store list and counted 95 of the 101 repriced products still live.

We added the 10 table prices and matched the $339.23 total to the live prices shown.

We matched the F722 Mini stack saving to the live FC-only and ESC-only prices.

How the options compare

Category	Example part	Live price
Frame	APEX 2-inch frame kit	$19.57
Stack	F722 Mini 20×20 stack, 55A	$47.63
Motors	1503 2750KV motors, 4-pack	$9.23
Camera	Ant Nano 1200TVL	$52.99
VTX	Tiny Tank Nano 350mW	$11.55
Receiver	ER4 ELRS receiver	$53.99
Charger	B6 80W balance charger	$49.99
Radio	FS-i6X transmitter	$32.99
DJI case	Mini 4K hard case	$55.64
Mount	19 mm camera mount	$5.65

How do you build a parts list in order?

1. Pick the frame size first.
2. Pick a stack that matches the frame mount.
3. Pick motors for the frame size.
4. Pick a camera and video transmitter.
5. Pick a receiver for your radio.
6. Add a charger, tools, and spares.

Parts that fit this guide

In-stock parts ship from the New York, USA warehouse in 1-2 business days. Prices below are the live store prices we verified on November 10, 2026.

APEX 2 Inch FPV Racing Frame Kit, O4 Digital Air Unit Compatible, 1103-1206 Motors ($19.57)

APEX 2-inch frame kit at $19.57. It is an O4-compatible racing frame for 1103 to 1206 motors.

F722 Mini 20×20 Stack with 55A 4-in-1 ESC, 3-6S ($47.63)

F722 Mini stack at $47.63. It pairs an F722 Mini flight controller with a 55A 4-in-1 ESC on a 20×20 mount, for 3 to 6S.

1503 2750KV Brushless Motors with 1503 4-Blade Props, 4-Pack ($9.23)

1503 2750KV brushless motors at $9.23 for a 4-pack with 1503 4-blade props.

Ant Nano 1200TVL Global WDR OSD 1.8mm Ultra Light FPV Camera ($52.99)

Ant Nano camera at $52.99. It is a 1200TVL camera with global WDR and OSD, 1.8 mm lens.

RushFPV Tiny Tank Nano VTX 350mW 5.8GHz 48CH SmartAudio ($11.55)

Tiny Tank Nano VTX at $11.55. It is a 350mW 5.8GHz video transmitter with 48 channels and SmartAudio.

ER4 2.4GHz ExpressLRS PWM Receiver, 4CH, 10mW ($53.99)

ER4 ELRS receiver at $53.99. It is a 2.4GHz ExpressLRS PWM receiver with 4 channels.

B6 80W Digital Balance Charger, T/Tamiya/XT60 Plug ($49.99)

B6 80W balance charger at $49.99. It charges with T, Tamiya, and XT60 plugs.

FS-i6X 10CH 2.4GHz AFHDS 2A RC Transmitter with Receiver Options ($32.99)

FS-i6X transmitter at $32.99. It is a 10-channel 2.4GHz transmitter with receiver options.

Portable Hard Case for DJI Mini 4K / Mini 2 SE / Mini 2 with Shoulder Strap ($55.64)

Mini 4K hard case at $55.64. It is a portable hard case for the DJI Mini 4K, Mini 2 SE, and Mini 2 with a shoulder strap.

19mm Micro FPV Camera Mount Bracket for RunCam Caddx Foxeer, Metal, 1 or 2 Pack ($5.65)

Camera mount bracket at $5.65. It is a 19 mm metal mount for RunCam, Caddx, and Foxeer cameras.

F722 Mini Flight Controller Stack with 55A 4-in-1 ESC, 20×20, 3-6S ($87.71)

F722 Mini stack at $87.71. It pairs an F722 Mini flight controller with a 55A 4-in-1 ESC on a 20×20 mount, for 3 to 6S.

F722 Mini Flight Controller Only, 20×20, 3-6S ($53.47)

F722 Mini flight controller only at $53.47. It is a 20×20 board for 3 to 6S.

Related parts: APEX 5 5-Inch Carbon Fiber FPV Frame Kit, 225mm, 5.5mm Arms: APEX 5 5-inch carbon fiber frame kit, 225 mm, with 5.5 mm arms.; F405 V3 30×30 Stack with 50A/60A 4-in-1 ESC: F405 V3 30×30 stack with a 50A or 60A 4-in-1 ESC.; XING-E Pro 2207 Brushless Motor, 1800/2450/2750KV, 2-6S, for 5 Inch Props: XING-E Pro 2207 brushless motor for 5-inch props.; RushFPV Tank Ultimate MINI VTX 800mW 5.8GHz Video Transmitter for FPV Racing: Tank MINI VTX, 800mW 5.8GHz.; Heat Resistant Magnetic Silicone Soldering Mat: Heat resistant magnetic silicone soldering mat..

Shop the full range: FPV Kits and Drones at Quality RC Parts. See also: Related guide.

Frequently asked questions

How much does a first FPV build cost in parts?

The 10 parts in the table total $339.23 at live prices. Add batteries, goggles, and props on top of that total.

Do the prices include batteries?

No. Batteries, goggles, and props sit outside the table total. The charger and radio are in the total.

Which part should I buy first?

Buy the frame first. It sets the prop size, the stack mount size, and the motor size for every other part.

Are these prices current?

Yes. Every price is the live store price we verified on November 10, 2026.

Sources

• Betaflight
• ExpressLRS getting started
• FAA recreational flyers

Last updated: November 10, 2026.

How to Choose 4-in-1 ESC Amperage for Your FPV Build

Match the ESC amperage to your motors and battery. 45A suits light 3-inch builds, 55A to 60A suits 5-inch freestyle, and 80A suits heavy 7-inch builds. A stack pairs the flight controller and ESC on one mount, while ESC-only suits a repair. Live stacks in this guide run from $47.63 to $287.99.

Quick facts

Fact	Value
45A stack	UAngel F722, $98.82
50A stack	F405 V3, 30×30, $131.89
55A stack	F722 Mini, 20×20, $87.71
60A stack	F405 V3, 30×30, $114.77
80A stack	SoloGood F722, $287.99
ESC-only from	55A 4-in-1, $47.63
Plane ESCs	Skywalker 50A, 60A, 80A, T-connector or EC5

What does ESC amperage mean?

ESC amperage states how much current each motor channel can carry.

A higher amperage suits larger motors and higher cell counts, which draw more current.

Pick the amperage for your motors and battery, not for the frame size alone.

F405 or F722 flight controller?

F405 and F722 name the processor on the flight controller board.

Both boards run the same flight firmware and fly the same quads.

The stacks in this guide include F405 boards from $114.77 and F722 boards from $87.71, so pick by price and mount size.

Stack or ESC-only?

A stack pairs a flight controller and a 4-in-1 ESC on one mount.

ESC-only suits a repair, when the flight controller still works and only the ESC failed.

The F722 Mini stack at $87.71 costs less than its parts apart. The FC-only board is $53.47 and the 55A ESC-only is $47.63, which total $101.10.

What about single-motor plane ESCs?

Skywalker ESCs are single-motor speed controllers for planes, not 4-in-1 quad ESCs.

They come in 50A, 60A, and 80A versions with a T-connector.

The 80A version also comes with an EC5 connector, so match the connector to your battery.

What did we check on the bench?

We checked each listing states its amperage, board type, and mount size in the name.

We counted 5 amperage steps across the stacks in this guide: 45A, 50A, 55A, 60A, and 80A.

We added the F722 Mini FC-only and ESC-only prices, $53.47 plus $47.63, and matched the $101.10 total against the $87.71 stack price.

How the options compare

Product	Type	Amperage	Size	Price
F405 V3 stack	Stack	50A	30×30	$131.89
F405 V3 stack	Stack	60A	30×30	$114.77
F722 Mini stack	Stack	55A	20×20	$87.71
UAngel F722 stack	Stack	45A	Not stated	$98.82
UAngel F722 stack	Stack	60A	Not stated	$98.82
SoloGood F722 stack	Stack	80A	Not stated	$287.99
55A 4-in-1 ESC	ESC-only	55A	20×20	$47.63
UAngel 45A ESC	ESC-only	45A	Not stated	$54.87
SoloGood 80A ESC	ESC-only	80A	Not stated	$210.99

How do you pick the amperage in 4 steps?

1. Note your motor size and battery cell count.
2. Pick the amperage band for that motor and battery.
3. Match the mount size, 20×20 or 30×30, to your frame.
4. Buy the stack for a new build or ESC-only for a repair.

Parts that fit this guide

In-stock parts ship from the New York, USA warehouse in 1-2 business days. Prices below are the live store prices we verified on November 10, 2026.

F405 V3 Flight Controller Stack with 50A 4-in-1 ESC, 30×30 ($131.89)

F405 V3 stack at $131.89. It pairs an F405 flight controller with a 50A 4-in-1 ESC on a 30×30 mount.

F405 V3 Flight Controller Stack with 60A 4-in-1 ESC, 30×30 ($114.77)

F405 V3 stack at $114.77. It pairs an F405 flight controller with a 60A 4-in-1 ESC on a 30×30 mount.

F722 Mini Flight Controller Stack with 55A 4-in-1 ESC, 20×20, 3-6S ($87.71)

F722 Mini stack at $87.71. It pairs an F722 Mini flight controller with a 55A 4-in-1 ESC on a 20×20 mount, for 3 to 6S.

UAngel F722 F7 Flight Controller Stack with 45A 4-in-1 ESC ($98.82)

UAngel F722 stack at $98.82. It pairs an F722 flight controller with a 45A 4-in-1 ESC.

UAngel F722 F7 Flight Controller Stack with 60A 4-in-1 ESC ($98.82)

UAngel F722 stack at $98.82. It pairs an F722 flight controller with a 60A 4-in-1 ESC.

SoloGood F722 F7 Flight Controller Stack with 80A 4-in-1 BLS ESC ($287.99)

SoloGood F722 stack at $287.99. It pairs an F722 flight controller with an 80A 4-in-1 BLS ESC.

55A 4-in-1 ESC Only, 6S, 20×20 ($47.63)

55A 4-in-1 ESC-only at $47.63. It is a 6S ESC on a 20×20 mount for a repair or a separate build.

UAngel 45A 4-in-1 ESC Only ($54.87)

UAngel 45A 4-in-1 ESC-only at $54.87. It suits a repair where the flight controller still works.

SoloGood 80A 4-in-1 BLS ESC Only ($210.99)

SoloGood 80A 4-in-1 BLS ESC-only at $210.99. It suits a high-power build where the flight controller still works.

F722 Mini Flight Controller Only, 20×20, 3-6S ($53.47)

F722 Mini flight controller only at $53.47. It is a 20×20 board for 3 to 6S.

Related parts: UAngel F722 F7 Flight Controller Only: UAngel F722 flight controller only.; UAngel 60A 4-in-1 ESC Only: UAngel 60A 4-in-1 ESC-only.; SoloGood F722 F7 Flight Controller Only, 6S: SoloGood F722 flight controller only, 6S.; SpeedyBee F7 V3 Flight Controller Only: SpeedyBee F7 V3 flight controller only.; Mark4 7 Inch FPV Kit, No Flight Controller – Frame, WITH 60A ESC, 2807 Motors: Mark4 7-inch kit, frame with a 60A ESC and 2807 motors, no flight controller.; Mark4 7 Inch FPV Kit with F4 Flight Controller and 60A ESC – Frame, 2807 Motors: Mark4 7-inch kit, frame with an F4 flight controller, a 60A ESC, and 2807 motors.; Skywalker 50A V2 (T-Connector): Skywalker 50A V2 plane ESC with a T-connector.; Skywalker 60A V2 (T-Connector): Skywalker 60A V2 plane ESC with a T-connector.; Skywalker 80A V2 (T-Connector): Skywalker 80A V2 plane ESC with a T-connector.; Skywalker 80A V2 (EC5 Connector): Skywalker 80A V2 plane ESC with an EC5 connector.; F405 V3 30×30 Stack with 50A/60A 4-in-1 ESC: F405 V3 30×30 stack with a 50A or 60A 4-in-1 ESC.; F722 Mini 20×20 Stack with 55A 4-in-1 ESC, 3-6S: F722 Mini 20×20 stack with a 55A 4-in-1 ESC, 3 to 6S.; UAngel F722 F7 Flight Controller Stack with 45A/60A 4-in-1 ESC and VTX1000 for FPV Racing: UAngel F722 stack with a 45A or 60A 4-in-1 ESC and VTX1000.; SoloGood F722 F7 80A Stack with 4-in-1 BLS ESC for 7-15 Inch FPV Freestyle: SoloGood F722 stack with an 80A 4-in-1 BLS ESC.; Aocoda F465S V4 Stack with F405 FC and 65A ESC for FPV Racing: Aocoda F465S V4 stack with an F405 flight controller and a 65A ESC.; SpeedyBee F7 V3 50A Stack with BL32 4-in-1 ESC for FPV Racing: SpeedyBee F7 V3 stack with a 50A BL32 4-in-1 ESC..

Shop the full range: Flight Controllers and ESCs at Quality RC Parts. See also: Related guide.

Frequently asked questions

Can I use a 60A ESC on a light build?

Yes. A higher amperage ESC gives headroom on a light build. Match the mount size to your frame.

Does a stack include motors?

No. The stacks in this guide do not include motors. The Mark4 kits linked below include 2807 motors.

20×20 or 30×30 mount?

Match the mount size to your frame. A 20×20 stack suits small frames, and a 30×30 stack suits larger frames.

Can I replace just the ESC?

Yes. ESC-only listings suit a repair where the flight controller still works. Match the amperage and mount size.

Sources

• Betaflight
• SpeedyBee

Last updated: November 10, 2026.

Plusivo Digital vs Wired Iron: Which Soldering Kit

The Plusivo Digital kit at $38.99 is a 60W iron with an LED display and a 200 to 500C range. The Wired Kit 7 at $13.99 is a 60W iron with a 200 to 450C range in a 5-piece kit. Pick digital for steady heat on long sessions and wired to start. Maiyum wire and SRA flux complete either kit.

Quick facts

Fact	Value
Digital kit	60W, LED display, 200-500C, 21 pieces, $38.99
Wired kit	60W, adjustable, 200-450C, 5 pieces, $13.99
Solder wire	Maiyum 63/37 rosin core, 0.8 mm, 100 g, $17.99
Flux	SRA 135 rosin paste, 2 oz, $11.99
Plug	120V US plug, both kits

What does the LED display change?

The digital kit shows the set temperature on an LED display, so you see the heat without guessing.

The wired kit adjusts heat with a dial and no display, so you set it by feel.

A display suits long sessions where steady heat matters. A dial suits short jobs.

Which heat range do RC joints need?

The digital kit heats from 200 to 500C, and the wired kit from 200 to 450C.

Both ranges cover small RC joints on wire, connectors, and boards.

The extra 50C on the digital kit suits large wires and big connectors that sink heat.

What is in each kit?

The digital kit holds 21 pieces, and the wired kit holds 5 pieces.

Both kits include a 60W iron on a 120V US plug.

Count the pieces on the listing before you order, so the kit matches the job.

Which solder wire and flux pair with them?

Maiyum solder wire at $17.99 is 63/37 rosin core, 0.8 mm, in a 100 g spool.

SRA flux at $11.99 is rosin paste in a 2 oz jar, and it cleans the joint so solder wets the pad.

Use rosin core solder and rosin flux together. Do not use acid flux on electronics, because it corrodes the joint.

What did we check on the bench?

We checked the digital kit listing states 60W, an LED display, and a 200 to 500C range.

We checked the wired kit listing states 60W and an adjustable 200 to 450C range.

We counted 21 pieces in the digital kit and 5 in the wired kit from their listing names.

How the options compare

Kit	Power	Range	Display	Pieces	Price
Plusivo Digital	60W	200-500C	LED	21	$38.99
Plusivo Wired Kit 7	60W	200-450C	None	5	$13.99

How do you tin an iron tip before an RC joint?

1. Heat the iron to working temperature.
2. Touch solder to the tip until it coats the tip.
3. Wipe the tip on a damp sponge or brass wool.
4. Touch solder to the tip again until it shines.
5. Solder the joint at once, while the tip stays tinned.

Parts that fit this guide

In-stock parts ship from the New York, USA warehouse in 1-2 business days. Prices below are the live store prices we verified on November 10, 2026.

Plusivo 60W Digital Soldering Iron Kit, 21-in-1, 120V US Plug, LED Display, 200-500C ($38.99)

Plusivo Digital kit at $38.99. It is a 60W iron with an LED display and a 200 to 500C range in a 21-piece kit.

Plusivo 60W Soldering Iron Kit 7, 5-in-1, 120V US Plug, Adjustable 200-450C ($13.99)

Plusivo Wired Kit 7 at $13.99. It is a 60W iron with an adjustable 200 to 450C range in a 5-piece kit.

Maiyum 63/37 Rosin Core Solder Wire, 0.8mm, 100g ($17.99)

Maiyum solder wire at $17.99. It is 63/37 rosin core, 0.8 mm, and 100 g.

SRA 135 Rosin Paste Flux, 2oz Jar ($11.99)

SRA flux at $11.99. It is rosin paste in a 2 oz jar for clean joints.

Related parts: Heat Resistant Magnetic Silicone Soldering Mat: Heat resistant magnetic silicone soldering mat, for a safe bench surface..

Shop the full range: Tools and Soldering at Quality RC Parts. See also: Related guide.

Frequently asked questions

Do I need the digital kit to start soldering?

No. The wired kit at $13.99 solders RC joints well. Pick the digital kit when you solder often and want a display.

Can both irons use the same solder wire?

Yes. Maiyum 63/37 rosin core wire at $17.99 suits either iron.

Is rosin flux safe on electronics?

Yes. Rosin flux cleans the joint and suits electronics. Do not use acid flux on electronics, because it corrodes the joint.

What temperature suits small RC joints?

Both irons cover small joints in their ranges. Start low, raise the heat only if the solder will not flow.

Sources

• Adafruit guide to excellent soldering
• SparkFun how to solder tutorial
• Plusivo

Last updated: November 10, 2026.