DJI Compatible Accessories Check: Match Third-Party Parts to Your Exact Model

DJI Compatible Accessories Check: Match Third-Party Parts to Your Exact Model

A DJI compatible accessories check matches a third-party part to your exact DJI model before you order. Confirm five things: the drone model name, the propeller model number and direction, the guard fit and weight, the case contents and controller model, and the included hardware. The accessories in this guide are third-party parts compatible with selected DJI models. They are not DJI-branded parts, and no DJI authorization is claimed.

Model names in the DJI Mini and Mavic lines are close enough to confuse: Mini 4 Pro and Mini 4K are different aircraft, Mini 3 and Mini 3 Pro take different listings in some cases, and Mavic Mini is not a Mini 2. This guide is the cross-model verification method. Per-model fit guides already live on this site for the Mini 3 Pro, Mini 2 SE, Flip, Avata 2, and Air 3 series; they are linked at the end. Prices were checked November 18, 2026. Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.

DJI compatible accessories check: the five matches

Run these five matches in order for every accessory, and stop at the first mismatch. First, the drone model: the listing must name your exact model, not a nearby one. Second, propellers: the prop model number and the CW/CCW direction set must match. Third, guards: the guard listing must name your model and state its weight, because guards add mass. Fourth, cases: the case must fit your drone plus your exact controller model. Fifth, included hardware: screws, screwdrivers, and straps are included on some listings and absent on others, so check the contents line before checkout.

Compatibility in this guide is stated only as the live listings state it. Every linked listing states “Compatible Drone Brand: DJI” plus named models in its specifications, or names the DJI models in its description. No compatibility is claimed beyond what the listing states, and no complete DJI drones are linked or sold here. If a listing does not name your model, do not assume it fits.

Propeller model numbers and CW/CCW sets

Propellers identify by model number first. DJI’s own support table lists the Mini 4 Pro propeller model as 6030F, measuring 15.24 x 7.62 cm. That table anchors the method: find the prop model number for your aircraft, then match the listing to it. Third-party listings use their own model numbers alongside the DJI-style size code, so read both.

The 6030F-style folding carbon propellers (listing model TS-6030F) (from $12.72 for an 8-blade set with 4 CW and 4 CCW blades; 16-blade sets $27.57 to $28.61) are third-party carbon propellers whose listing states compatibility with DJI Mini 3, Mini 3 Pro, and Mini 4 Pro. The listing states a weight of about 0.94g per blade. The listing name begins with the DJI name and the 6030F code; the part itself is a third-party accessory, model TS-6030F, not a DJI-branded propeller. Choose the variation that names your model and the CW/CCW set you need.

CW and CCW matter because each motor spins one direction, and each propeller is handed to match. A CW blade on a CCW motor produces thrust in the wrong direction for that corner. Sets in this guide sell matched CW and CCW blades together: check that the variation you pick includes both directions in the count you need (4 CW and 4 CCW for a full set of four motors, or 8 and 8 for spares).

For the DJI Flip, the 4022F propellers for DJI Flip ($9.99 in Black or Orange, $15.99 in Red or Blue) include 8 single blades, 8 screws, and a screwdriver per set. The listing instructs that the 4022F marking faces up during installation. Screw inclusion is the check here: this listing includes screws and a screwdriver, so a full swap needs nothing else. Other propeller listings state blades only, so check the contents line on each listing before assuming screws are included.

For the Mini 3 and Mini 3 Pro, two listings show why the model variation matters. The 8-piece propeller blade sets for DJI Mini 3 Pro and Mini 3 ($7.14 to $7.40 by model and color, listing model SKTU-001-324, 0.9g) split into Mini 3 and Mini 3 Pro variations. The 8-piece propeller sets for DJI Mini 3 and Mini 3 Pro ($10.69 for the Mini 3 variation, $11.99 for the Mini 3 Pro variation) also split by model. Pick the variation that names your exact model. Do not assume a Mini 3 Pro propeller fits a Mini 4 Pro or the reverse: match the prop model number and the listing’s named models.

Propeller guards: model fit and added weight

Guards are model-specific: the mounting points differ between Mini generations, and a guard for one model does not transfer to another. The listings below state both the fit and the exclusions, and the exclusions are the useful part.

Guard set Fits (per listing) Does not fit (per listing) Weight Price
Propeller Guard Set, Mini 4 Pro DJI Mini 4 Pro Mini 4K, Mini 5 Pro About 43g $20.99
Propeller Guard Set, Mini 3 Pro and Mini 3 DJI Mini 3 Pro, Mini 3 Not stated About 43g $16.99
Propeller Guard Set, Mini 2 / SE / 2 SE / 4K Mini 4K, Mini 2 SE, Mini 2, Mini SE Mavic Mini Not stated $20.99
Propeller Guard, Mavic 3 Pro series Mavic 3 Pro, Pro Cine, 3, 3 Cine, 3 Classic, 3E, 3T, 3M Not stated Not stated $29.99

The Propeller Guard Set for DJI Mini 4 Pro ($20.99) is a 4-piece snap-on set in high-toughness ABS with front and rear rings connected as one frame, installing without tools. The Propeller Guard Set for DJI Mini 3 Pro and Mini 3 ($16.99) is the same 4-piece snap-on design in PC plus ABS, also about 43g. The Propeller Guard Set for DJI Mini 2, Mini SE, Mini 2 SE and Mini 4K ($20.99) covers four models in one listing and states plainly that it is not for the Mavic Mini. The Propeller Guard for DJI Mavic 3 Pro ($29.99) uses a two-piece semi-surrounded structure with quick-release buckle mounting and names eight Mavic 3 variants. Weight is the second check: about 43g of guards changes flight time and handling, so factor it in before a long flight, and check your aircraft manual for any guard weight guidance.

Cases: fit the drone, the controller, and the batteries

A case check has three parts: the drone model, the controller model, and the battery count. Controller names are as easy to confuse as drone names: RC 2, RC-N2, RC-N1, RC, and RC Pro are different controllers with different shapes, and a case molded for one does not hold another properly.

Case Drone fit (per listing) Controller fit (per listing) Price
Hard Storage Case, Mini 4 Pro Mini 4 Pro RC 2 or RC-N2 $32.99
Waterproof Hard Storage Case, Mini 4 Pro Mini 4 Pro Controller (model not specified) $44.99
Hard Shell Travel Case, Mini 4 Pro Mini 4 Pro RC 2 From $36.48
Hard Shell Suitcase, Mini 3 / 3 Pro Mini 3, Mini 3 Pro RC or RC-N1 From $46.83
PGYTECH Hard Shell Case, Mavic 3 series Mavic 3, 3 Pro, 3 Classic RC Pro, RC, or RC-N1 $69.99

The Hard Storage Case for DJI Mini 4 Pro ($32.99) is a hard EVA shell with custom-cut compartments, a full-perimeter zipper, and a mesh accessory pocket, and it names both the RC 2 and RC-N2 controllers. The Waterproof Hard Storage Case for DJI Mini 4 Pro ($44.99) seals the drone, controller, and batteries against rain, spray, and dust, but its listing says “controller” without naming a controller model: check your controller against the case before ordering. The Hard Shell Travel Case for DJI Mini 4 Pro ($36.48 in Black, $36.63 in Grey) fits the drone and the RC 2 controller with a zippered mesh lid pocket. The Hard Shell Suitcase for DJI Mini 3 and Mini 3 Pro ($46.83 to $47.28 without a strap, $65.13 to $65.88 with a shoulder strap) holds the drone, an RC or RC-N1 controller, six intelligent flight batteries, propellers, and the charging cable in custom foam, measuring 33 x 11.5 x 27 cm. The PGYTECH Hard Shell Carrying Case for DJI Mavic 3, Mavic 3 Pro and Mavic 3 Classic ($69.99) is molded EVA cut for the drone, controller, 3 intelligent flight batteries including the one inside the drone, charging hub, and power adapter, with a splash-proof rating of IPX3 to IPX4. Drones, controllers, and accessories shown in case listings are not included.

Bundles and small parts: read the contents line

Bundles remove fit guessing when every item in the box is sized for one model, but only if the bundle names your model. The Mini 4 Pro Accessories Bundle ($37.99) includes 8 propellers, a propeller guard, landing gear, a prop holder, and a gimbal cover, and states Mini 4 Pro only. The Prop Guard and Propeller Bundle for Mini 2/4K/SE ($29.99) includes a 360-degree prop guard, 16 propellers, a prop holder, and landing gear extensions, for the Mini 2, Mini 4K, and Mini SE. Note the model split: the Mini 4K sits in the Mini 2 family bundle, not the Mini 4 Pro bundle. That split is exactly why the model check comes first.

Small parts follow the same rule. The Landing Gear Leg Extensions for Mini 4 Pro ($28.99) add ground clearance and are shaped to the Mini 4 Pro landing feet. The Prop Holder Blade Strap for Mini 4 Pro ($14.99) holds the blades flat against the arms for transport. The Arm Anti-Shock Fixing Buckle Pair for DJI Flip ($13.99) locks the front and rear propeller arms together, weighs 8g per pair, and fits the DJI Flip only. The Lens Cover for Mini 3 ($13.99 in Gray or Black) is a lens hood and gimbal guard molded for the DJI Mini 3, weighing 15g, and the listing states it is designed for the Mini 3. A Mini 3 lens cover is not a Mini 3 Pro lens cover unless the listing says so.

Cross-model traps

Trap What the listings show
Mini 4 Pro vs Mini 4K Different guard listings; Mini 4K bundles with Mini 2/SE; Mini 4 Pro guard listing excludes Mini 4K and Mini 5 Pro
Mini 3 vs Mini 3 Pro Some propeller listings split into separate Mini 3 and Mini 3 Pro variations; guards cover both in one listing
Mavic Mini vs Mini 2 family Mini 2/SE/2 SE/4K guard listing states it is not for Mavic Mini
RC 2 vs RC-N2 vs RC-N1 Cases name specific controllers; a case molded for RC 2 does not hold an RC-N1
Prop model numbers 6030F for Mini 4 Pro per DJI support table; 4022F for Flip per its listing; match the number, not the size guess

Verification checklist before you order

  1. Read the exact drone model name off the aircraft or its box, not from memory.
  2. Confirm the listing names that exact model in its fit line. Exclusions in the listing win over assumptions.
  3. For propellers, match the prop model number and confirm the CW/CCW set includes both directions.
  4. Check the contents line for screws, screwdrivers, and straps. Assume nothing is included unless stated.
  5. For cases, confirm the drone model, the controller model, and the battery count the case holds.
  6. For guards, note the stated weight and check your aircraft manual for guard guidance.
  7. For bundles, confirm every item in the box is sized for your model, not just the headline item.

Browse the full range in DJI Accessories and DJI Mini 4 Pro Accessories. Related guides: Best DJI Propeller Guards, Best DJI Hard Shell Cases, Best DJI Mini 3 Pro Accessories, Best DJI Mini 2 SE Accessories, Best DJI Flip Accessories, Best DJI Avata 2 Accessories, Best DJI Air 3S Accessories, Best DJI Accessories Under $50, and Best DJI Mini 4 Pro Cases.

Frequently asked questions

Do Mini 3 Pro propellers fit the Mini 4 Pro?

Do not assume so. Match the propeller model number and the listing’s named models. DJI’s support table lists the Mini 4 Pro propeller model as 6030F. Some third-party listings name Mini 3, Mini 3 Pro, and Mini 4 Pro together, while others split Mini 3 and Mini 3 Pro into separate variations. The listing that names your exact model is the one to order.

What is the difference between CW and CCW propellers, and how do I match them?

CW (clockwise) and CCW (counter-clockwise) propellers are handed to match the spin direction of each motor. Each corner of the aircraft needs the blade handed for that motor. Sets sell matched CW and CCW blades together; confirm the variation includes both directions in the count you need, and install each blade on the motor it is handed for.

How do I check a third-party propeller is the right model number for my DJI drone?

Find the propeller model number for your aircraft from the DJI support table or your aircraft manual, then match it against the listing. Third-party listings carry their own model numbers too (for example, TS-6030F and SKTU-001-324 in this guide), so read both numbers and the named models. If the listing does not name your model, do not order it on size alone.

Will a Mini 4 Pro case fit a Mini 3 Pro?

Only if the listing names both models. Cases in this guide are molded for specific drones and controllers: Mini 4 Pro cases name the RC 2 or RC-N2, while Mini 3 and Mini 3 Pro cases name the RC or RC-N1. A case molded for one drone and controller combination does not hold a different combination properly.

Which controller does this accessory fit: RC 2, RC-N1, or RC-N3?

Read the controller line on the listing. Cases in this guide name RC 2, RC-N2, RC, RC-N1, or RC Pro; one waterproof case says “controller” without naming a model, and that listing needs a fit check before ordering. No listing in this guide names the RC-N3, so do not assume RC-N3 fit from any listing here.

Are third-party DJI accessories the same as DJI-branded parts?

No. The accessories in this guide are third-party parts whose listings state compatibility with selected DJI models. They are not DJI-branded parts, and Quality RC Parts does not claim DJI authorization. Compatibility is stated only as the listing states it, and the model, prop number, and controller checks in this guide are how you confirm fit before ordering.

Sources