
The ELEGOO UNO R3 Microcontroller Board is a practical starting board for maker desks, classrooms, coding clubs, and robotics labs. It comes with the board and a USB cable in the box, so you can plug in and upload your first sketch right away.
What you get
One ELEGOO UNO R3 board and one USB-A to USB-B data cable. Breadboard, sensors, shields, and a power adapter are not included.
Specs that matter
- ATmega328P main chip, 16 MHz clock, 32 KB flash memory
- ATmega16U2 USB chip for sketch uploads and serial communication
- 14 digital I/O pins, 6 with PWM output
- 6 analog inputs
- Power from USB or a 7 to 12V external supply
- Works with the Arduino IDE
What to build first
Start with LEDs, buttons, and a buzzer to learn digital pins and PWM. Then add a sensor module, a servo, or a display. The clearly labeled headers make wiring to jumper wires, shields, and modules simple, and the board accepts compatible shields for data logging, automation, and robotics projects.
Pairs well with
- 28BYJ-48 Stepper Motor Kits for precise movement in pan and tilt mounts and small robots
- L298N Dual H-Bridge Motor Driver Module for larger DC motors and stepper projects
- Nano V3.0 Development Board when you need the same chip in a smaller board for permanent builds
Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.
