
Microcontroller Picker: Tables for ESP32, Arduino, Pico
Use this microcontroller picker to match a board to your project in 4 checks: wireless, voltage, size, and camera. ESP32 boards suit WiFi projects at 3.3 volts, Arduino boards suit 5 volt wiring, and Pico boards suit small USB projects at 3.3 volts. The tables below name listings with prices checked November 16, 2026.
Last updated: November 16, 2026. Category counts and prices in this guide were checked on that date.

- ESP32 and ESP8266: 46 listings.
- Raspberry Pi and Pico: 30 listings.
- Arduino-Compatible Boards: 3 listings.
- Microcontrollers and Development: 147 listings in total.
How does the microcontroller picker work?
The microcontroller picker runs 4 checks in order: wireless, voltage, size, and camera. Answer each check, then read the row that matches your answers. Each row names a live listing so you can verify the pins and price before you order.
Voltage decides wiring safety. ESP32 and Pico boards use 3.3 volt logic, while Arduino Uno boards use 5 volt logic. The Espressif datasheet states a 3.0 to 3.6 volt range for the ESP32 module.
Use this board picker before you open a listing. It narrows 147 listings to 1 family in 4 checks.
Which board fits a WiFi project?
For ESP32 board choice, pick an ESP32 board for a WiFi project, because ESP32 modules carry WiFi and Bluetooth radios. The ESP32 DevKit V1 listing names WiFi and Bluetooth at $13.99. The ESP32-S3 DevKitC-1 listing names WiFi and Bluetooth at $9.99 for the No Header options.
The ESP32-S2 Mini listing names WiFi at $7.99 for a smaller board. The ESP32-H2 SuperMini listing names BLE, Zigbee, and Thread at $16.99. That H2 board lists no WiFi in its title, so pick a DevKit or S3 board when WiFi is required.
Which board fits 5 volt sensor wiring?
For Arduino board choice, pick an Arduino board for 5 volt sensor wiring, because Uno digital pins run at 5 volts. The ELEGOO UNO R3 listing names the ATmega328P processor at $21.99. The Arduino Uno documentation states 14 digital pins and 6 analog inputs.
The Nano V3 single listing names the same ATmega328P processor at $8.49 for one board. Use the Uno for bench wiring with room to spare. Use the Nano when the board must fit a small enclosure.
Which board fits a small USB project?
For Pico board choice, pick a Pico board for a small USB project, because Pico boards expose 26 GPIO pins at 3.3 volts. The Pico datasheet states 26 GPIO pins fixed at 3.3 volts. The RP2040-Zero listing names 2MB flash at $4.99 for the 1-pack.
The Raspberry Pi Pico W listing names WiFi at $27.99 with pre-soldered headers. Pick the RP2040-Zero for the smallest USB-C builds. Pick the Pico W when the project needs WiFi plus Pico pins.
Which board fits a camera project?
The ESP32-CAM fits a camera project, because its listing ships with a fitted OV2640 camera module. The ESP32-CAM listing names 4MB PSRAM at $25.99. The Espressif ESP32 page states WiFi and Bluetooth for the ESP32 family.
Camera boards need more memory than plain sensor boards. The 4MB PSRAM figure comes from the listing title. Check the listing for the camera resolution and the USB adapter before you order.
What do the picker tables show side by side?
The table below compares 6 boards on logic voltage, wireless, and listed price. Voltages are family logic levels from the linked datasheets. Check each listing for its input range before you wire power.
| Board | Logic voltage | Wireless | Listed price |
|---|---|---|---|
| ESP32 DevKit V1 | 3.3 volts | WiFi and Bluetooth | $13.99 |
| ESP32-S3 DevKitC-1 | 3.3 volts | WiFi and Bluetooth | $9.99 |
| ELEGOO UNO R3 | 5 volts | None listed | $21.99 |
| RP2040-Zero | 3.3 volts | None listed | $4.99 |
| Raspberry Pi Pico W | 3.3 volts | WiFi | $27.99 |
| ESP32-CAM | 3.3 volts | WiFi and Bluetooth | $25.99 |
The lowest listing price in this table is $4.99 for the RP2040-Zero. Prices are the live listing prices checked November 16, 2026. Variable listings show the price of the option named in the row.
What prompt can you paste into ChatGPT?
Paste the 1 prompt below into ChatGPT, fill the brackets, and check the answer against the tables above.
Help me pick a microcontroller board. My project needs: [WiFi yes or no], [5 volt or 3.3 volt parts], [number of sensors], [camera yes or no]. Recommend 1 board family and 2 checks I must run on the listing before I order. Keep the answer under 150 words.
ChatGPT answers from search indexes, not from live store stock. Verify the price and the variation on the listing before you order.
Frequently asked questions
Can one board serve every project?
No. WiFi projects need a radio, 5 volt sensors need 5 volt pins, and camera projects need memory. Run the 4 checks above and pick the family that matches all 4 answers.
Do ESP32 and Arduino boards use the same voltage?
No. ESP32 modules run at 3.3 volts, and Arduino Uno pins run at 5 volts. The linked Espressif and Arduino documents state both voltages.
What if a sensor needs 5 volts and the board uses 3.3 volts?
Use a level shifter, or pick a sensor rated for the board voltage. Check the sensor listing for its voltage range before you connect power. A 5 volt signal on a 3.3 volt pin can damage the pin.
How current are the prices in these tables?
Prices were checked on November 16, 2026. Prices change, so open each listing to confirm the live price and the variation before you order.
Parts used in this guide
Every link below opens a live catalog page, checked on November 16, 2026.
- Boards: ESP32 DevKit V1, ESP32-S3 DevKitC-1, ESP32-S2 Mini, ESP32-H2 SuperMini, ELEGOO UNO R3, Nano V3 single, RP2040-Zero, Raspberry Pi Pico W, ESP32-CAM
- Categories: Microcontrollers and Development, ESP32 and ESP8266, Raspberry Pi and Pico, Arduino-Compatible Boards
- Related guides: Arduino vs ESP32 vs RP2040: Which Dev Board for Your Robot, How to Choose Microcontrollers for Robotics Projects
Stocked items ship from New York, USA, in 1 to 2 business days. Orders under $100 ship for $4.95 flat, and orders over $100 ship free, per the shipping page.
Sources
- Arduino Uno Rev3 documentation (Arduino): 14 digital pins at 5 volts, 6 analog inputs.
- ESP32-WROOM-32E datasheet (Espressif): 3.0 to 3.6 volt operating range, 3.3 volt typical supply.
- Raspberry Pi Pico datasheet (Raspberry Pi): 26 GPIO pins fixed at 3.3 volts.
- ESP32 SoC page (Espressif): WiFi and Bluetooth for the ESP32 family.
- Quality RC Parts catalog listings and category counts, checked November 16, 2026.
Related guides
Orders earn QRC Rewards points.
Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.
