Description
HiLetgo GY-US42 ultrasonic distance module for flight controllers and robotics. The probe sends an ultrasonic pulse, listens for the echo, and works out the distance from the time difference, so your controller gets a clean range reading for altitude hold, landing, and obstacle sensing.
Read the module three ways: serial UART at TTL level, I2C, or pulse PWM output in the same style as the SR04. The serial baud rate is configurable at 9600 or 115200 bps with continuous or on-request output, and the I2C address can be changed so several modules share one bus.
Specs:
- Working voltage: 3-5V
- Interfaces: UART (TTL), I2C, PWM
- Serial baud: 9600bps or 115200bps, configurable
- Output modes: continuous or on-request, settings saved
- I2C address: changeable for multi-module buses
- Replaces: MB1242, SRF02
- Board marking: GY-US42V2
- Quantity: 1 module
Good for Pixhawk and APM altitude sensing, robot distance measurement, and Arduino projects that need a small low-power range sensor.
I check every order before it ships. Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.







Reviews
There are no reviews yet.