MAVLink2 WiFi Telemetry Module for Pixhawk/APM

Description

WiFi radio telemetry module for Pixhawk and APM flight controllers. Connects Mission Planner or QGroundControl wirelessly over MAVLink2. Choose V1.0, V2.0, or V3.0.

Specifications:

• Protocol: MAVLink2
• Range: 100 – 200 m
• Default baud rate: 57600 (115200 and others also work)
• Mission Planner connection: UDP, port 14550
• Default hotspot name: Drone
• Default hotspot password: 12345678
• Configuration page: http://192.168.4.1

Notes:

• For PX4 firmware use TELEM1. For Ardupilot firmware TELEM2 is recommended.
• Power the flight controller with a 3DR power module or 5V ESC when using WiFi telemetry. USB takes priority, so unplug the USB cable or telemetry will not work.
• The button on the module is a reset button, not a reboot button. Pressing it restores all parameters to defaults.
• Some iOS devices cannot get an IP automatically. Set a manual IP (for example 192.168.4.5), subnet mask 255.255.255.0, router 192.168.4.1.