Description
A Pico 2 microcontroller board compatible with the Raspberry Pi Pico 2, powered by the official RP2350 microcontroller chip with a unique dual-core and dual-architecture design, running up to 150 MHz, with 520 KB of SRAM and 4 MB of on-board flash memory, and 26 multi-function GPIO pins.
The design pairs a dual-core Arm Cortex-M33 processor with a dual-core Hazard3 RISC-V processor. The castellated module allows soldering direct to carrier boards, with USB 1.1 device and host support, low-power sleep and dormant modes, and drag-and-drop programming using mass storage over USB. A yellow pre-soldered header, a 3-pin yellow pin header, and a USB-A to micro USB cable about 1.2 m long are included.
Specifications
- Chip: official RP2350, dual-core Arm Cortex-M33 and dual-core Hazard3 RISC-V, up to 150 MHz
- Memory: 520 KB SRAM, 4 MB on-board flash
- GPIO: 26 multi-function pins
- Yellow pre-soldered header, castellated module
- USB 1.1 host and device, drag-and-drop programming over USB mass storage
- Compatible with Raspberry Pi Pico 2; this is a compatible board, not a genuine Raspberry Pi board
In the box
One Pico 2 board with yellow pre-soldered header, one 3-pin yellow pin header, and one USB-A to micro USB cable about 1.2 m long.
How to use it
Plug the board into a breadboard with the yellow pre-soldered header, hold BOOTSEL, plug in USB, and drag the MicroPython UF2 file onto the drive that appears. Then run a blink script. This board has no wireless, so it suits wired and offline projects.
Pairs with
Spare headers and a case finish the board. See pin header set 30-piece for Pico and C4Labs Zebra Pico case.
Compare
The genuine Raspberry Pi Pico 2 is the Raspberry Pi board without a pre-soldered header. Alternative: Raspberry Pi Pico 2.
Full comparison: Raspberry Pi Pico vs Pico W vs Pico 2.
Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.








Reviews
There are no reviews yet.