Powered USB Hub, 7-Port USB 3.0 with 5V/4A Power Adapter

$38.99

Powered USB hub, 7-port USB 3.0, with a 5V/4A power adapter and individual on/off switches. Turns one USB port into seven, each with full power and full 5 Gbps speed, so ESP32 boards, cameras, and capture adapters stop dropping off. Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.

10 in stock

Create an account to earn 38 QRC Rewards points with this item.

Description

One USB port is not enough on a bench. A DevKit, an ESP32-CAM, a USB capture adapter, and a flash drive is four devices before you have plugged in a keyboard. An unpowered hub shares the host port’s 900 mA across all of them, and the hungriest device drops off first, usually in the middle of a flash or a capture.

This hub fixes that with power. It turns one USB 3.0 port into seven USB 3.0 data ports, each with its own on/off switch, plus a smart charging port, all fed by an included 5V/4A power adapter. Each data port can deliver up to 1.5 A, and the combined current across the hub must not exceed 4 A. The smart charging port delivers up to 2.4 A for phones, tablets, and cameras. Data runs at up to 5 Gbps, backward compatible with USB 2.0 devices.

The switches are the part you use every day. Flip a port off to power-cycle a stuck ESP32 board without unplugging it, or to cut power to a camera you are not using. The hub is plug and play with no drivers on Windows, Mac OS X, and Linux, and it supports hot swapping, so you can plug devices in and out while the computer runs.

What to check before you buy: this hub needs a USB 3.0 host port to hit 5 Gbps. On a USB 2.0 host port it still works, but every port drops to USB 2.0 speed. Count your power-hungry devices before you load it up: the adapter supplies 4 A total, so seven devices pulling 1.5 A each is more than the adapter can give. Spread the heavy loads, and use the smart charging port for the phone, not a data port.

The hub cable is 100 cm, so the hub sits on the bench within reach of the computer. Pair it with our USB extension cable for short runs. Our guide, Extend USB Cable Without Losing Speed, explains the 3 m passive limit and when a powered hub is the fix.

Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping. Quality RC Parts ships within the USA only.

Specs:

  • Ports: 7 x USB 3.0 data ports + 1 smart charging port
  • Data speed: Up to 5 Gbps
  • Power adapter: 5V/4A included
  • Combined current: 4 A maximum across all ports
  • Per-port current: 1.5 A maximum per USB 3.0 data port
  • Smart charging port: Up to 2.4 A
  • Switches: Individual on/off switch per port
  • Cable length: 100 cm
  • Compatibility: Windows, Mac OS X, Linux; plug and play, no drivers; hot swapping

Additional information

Ports

7 x USB 3.0 data ports + 1 smart charging port

Data speed

Up to 5 Gbps

Power adapter

5V/4A included

Switches

Individual on/off switch per port

Compatibility

Windows, Mac OS X, Linux; plug and play, no drivers

Reviews

There are no reviews yet.

Be the first to review “Powered USB Hub, 7-Port USB 3.0 with 5V/4A Power Adapter”

Your email address will not be published. Required fields are marked *