Description
RadioLink AT9S Pro 10/12 channel 2.4GHz RC transmitter with R9DS receiver, Champagne Gold. DSSS and FHSS communication technology with stable transmission and long-range control up to 2.1 miles (3.4km) in the air.
Key features: 10/12 channels, information telemetry (works with PRM-01 or PRM-03), RSSI telemetry, dual/triple rates, throttle lock, fail-safe setting, end point adjustment (EPA), switch assignments, and 8 programmable mixes control. 15 model memories.
Real-time information: airplane voltage shows on the AT9S Pro screen when paired with PRM-01. With a PRM-03 module (sold separately) and a flight controller, telemetry on the radio screen includes battery voltage, speed, altitude, RSSI, distance, and more.
3-in-1 multi-function port supports most simulators, TBS Crossfire protocol (915 module), and RadioLink wireless trainer mode. All accessories sold separately.
Safety: signal strength indicator (RSSI) alerts, low voltage alarm, and fail-safe protection, with sounds, vibration, and word alarms on the 2.8 inch LCD screen (320×480 pixels, outdoor readable).
Operating voltage 7.4 to 18.0V. Compatible receivers: RadioLink R12DS, R12DSM, R12DSE, R9DS, R6DS, R6DSM, and CRSF. Package: AT9S Pro transmitter, R9DS receiver, throttle self-return accessory, strap, and quick start guide.
Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.
Mode 2 (left-hand throttle) and stick mode conversion
This transmitter ships as Mode 2, with the throttle on the left stick. The left throttle stick stays where you put it and does not spring back to center, while the right elevator stick self-centers.
To fly Mode 1 instead, change the hardware and the software setting together. The box includes the throttle self-return accessory (a tension plate and spring) for the swap. Open the back cover and exchange the positions of the lever arm spring and the tension plate between the two sticks, so the right stick becomes the non-centering throttle and the left stick self-centers. Then set the matching mode in the menu: hold MODE for one second to open the BASIC MENU, go to PARAMETER, and set STK-MODE to Mode 1. Calibrate the sticks after the change: hold END and PUSH together while you switch the transmitter on, then follow the steps on the screen. RadioLink shows the full swap in its official video guide: How to Change RadioLink AT9S Pro/AT10II Joystick Modes. Full manual: RadioLink AT9S Pro User Manual. RadioLink also notes in the manual that the mechanical ratchet change can be done by a service center.








Reviews
There are no reviews yet.