Description
The RadioLink M10N SE100 is a GPS and compass module for Pixhawk flight controllers. It uses the u-blox M10050 GNSS chip with a built-in IST8310 high-precision electronic compass, a 2.5 dBi high-gain ceramic antenna, and two-stage filtering with 78 dB attenuation against out-of-band interference.
Positioning accuracy is up to 50 cm in quad mode and 250 cm in single mode, as listed. The module positions 20 satellites in 6 seconds on open ground. It supports GPS, GLONASS, and BeiDou signals.
Specifications (as listed)
- GNSS chip: u-blox M10050 (RadioLink SE100)
- Compass: IST8310 electronic compass, I2C port
- GPS port: UART, 9.6K baud
- Connectors: GH 1.25
- Power: 5V DC plus or minus 5 percent, 50 to 55 mA
- Update rate: 10 Hz
- Sensitivity: tracking and navigation -167 dBm, acquisition -163 dBm, cold start -151 dBm, hot start -159 dBm
- Start time: cold start 26 seconds, hot start 1 second
- Velocity precision: 0.1 m/s; max height 50000 m; max speed 515 m/s; max acceleration 4G
- Size: 1.89 x 1.6 x 0.59 inches
Compatibility
Compatible with Pixhawk flight controllers, as listed. Parameters are set through ArduPilot Mission Planner, RadioLink Mission Planner, or QGroundControl. Check your flight controller GPS port and protocol before ordering.
Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.









Reviews
There are no reviews yet.