Description
The RadioMaster RP1 V2 is a 2.4GHz ExpressLRS Nano receiver built on the ESP8285 MCU with an SX1281 RF chip and CRSF serial protocol. Maximum refresh rate 500Hz with approximately 0.8ms average latency for responsive FPV control. A built-in TCXO keeps frequency stable across temperature extremes. Built-in WiFi supports firmware updates and WebUI configuration without removing the receiver.
Pairs with RadioMaster TX16S, TX12, Boxer, Zorro and other ExpressLRS 2.4GHz transmitters. The 65mm UFL T antenna plugs into the UFL socket for full-range antenna use. Solder pads: 5V, TX, RX and ground.
Specifications:
- Protocol: ExpressLRS 2.4GHz, CRSF serial
- MCU: ESP8285
- RF chip: SX1281
- Maximum refresh rate: 500Hz (F1000Hz packet rate)
- Average latency: approximately 0.8ms
- Antenna: 65mm UFL T antenna
- Size: 13 x 11 x 3mm
- Features: TCXO, built-in WiFi, LED indicator
In the box: RP1 V2 receiver, 65mm UFL T antenna, CRSF wire, heat shrink.
Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.










Reviews
There are no reviews yet.