Description
The RadioMaster RP2 V2 is a 2.4GHz ExpressLRS Nano receiver built for micro-class drones, a tiny 13x11x7mm footprint, just 0.55g, with a built-in ceramic SMT antenna so there is no external antenna wiring to route. Built-in TCXO (V2 upgrade) keeps frequency stable across temperature extremes, preventing signal drift. Powered by the Semtech SX1281 RF chip + ESP8285 MCU with LoRa and FLRC 2.4GHz links, pre-installed with ExpressLRS v2.4 firmware, refresh up to 500Hz/F1000Hz. Built-in WiFi for wireless firmware updates and WebUI configuration; bind phrase support, no bind plug needed. CRSF interface, LED indicator, improved PCB layout for heat dissipation, enhanced solder pads.
Specifications:
- Antenna: Ceramic (integrated)
- MCU: ESP8285
- RF Chip: Semtech SX1281
- Protocol: ExpressLRS (ELRS V2)
- Frequency: 2.4GHz
- Refresh rate: 25Hz–500Hz / F1000Hz
- Telemetry power: 10mW
- Input voltage: 5V
- Size: 13mm x 11mm x 7mm
- Weight: 0.55g
- Built-in TCXO: Yes
- Application: Whoops, drones, fixed wing, FPV long range
- Compatible transmitters: TX16S ELRS, ZORRO ELRS, TX12 ELRS, any ELRS module
- Works with Betaflight, EmuFlight, INAV and ArduPilot via CRSF
In the box: 1x RP2 V2 receiver, 1x CRSF connection wire, 1x user manual.
Pairs well with: 2.4G ExpressLRS ELRS Receiver for FPV Freestyle Long Range Drones, RadioMaster RP3 Diversity ExpressLRS ELRS 2.4GHZ Nano Receiver Dual Antenna.
I check every order before it ships. Ships from NY, USA.
Related buying guide: Best RC Radios and ELRS Receivers for FPV
Reviews
There are no reviews yet.