
A crawler earns its look from the body and its capability from the hardware underneath it. Eight new RC truck parts landed at Quality RC Parts, and they cover both sides of that: two Pro-Line clear bodies, a Cherokee hard body shell kit, beadlock wheels with tires, a metal winch, a roof rack with a light bar, and a standalone LED light bar. All eight are live in the store now, shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.
The eight new parts at a glance
| Part | What it is | Fits | Price |
|---|---|---|---|
| Metal C-Hubs and Steering Blocks | Metal C-hubs, steering blocks, rear stub axle carriers with ball bearings | 1/10 Traxxas Slash 4×4, Stampede 4×4, Rustler 4WD | $39.99 |
| Pro-Line Comp Wagon Clear Body | Cab-only clear body | 12.3-inch wheelbase crawlers | $59.99 |
| Pro-Line 1997 Dodge Dakota Clear Body | Clear body | 12.3-inch / 313mm wheelbase scale crawlers | $59.99 |
| Cherokee Hard Body Shell Kit | Hard body shell kit, 313mm wheelbase | Axial SCX10, SCX10 II, TRX4 | $112.99 |
| HOBBYSOUL 2.2 Beadlock Wheels and Tires | Beadlock wheels and tires set, 5.0-inch tall tires, 40mm rims | TRX4, Gen8, Capra, Wraith mud crawlers | $131.99 |
| AMK Metal RC Winch Kit | Metal winch kit with controller | 1/10 crawler, TRX4, TRX6, SCX10, D90, CC01, TF2, Wrangler | $42.99 |
| Treehobby Metal Roof Rack with LED Light Bar | Metal luggage carrier roof rack, 245mm x 150mm | 1/10 crawler, SCX10, TRX-4, CC01, D90 | $48.99 |
| MEUS LED Roof Light Bar Kit | 45mm 4-bead LED light bar | 1/10 and 1/8 scale crawler, SCX10, Wraith, TRX4, TRX6, Gen8 | $18.99 |
Metal C-Hubs and steering blocks for Traxxas 4×4 trucks
The Metal C-Hubs, Steering Blocks and Rear Stub Axle Carriers with Ball Bearings for 1/10 Traxxas Slash 4×4, Stampede 4×4, Rustler 4WD is $39.99. Plastic C-hubs and steering blocks flex under steering load and crack after hard hits. Metal parts hold the geometry, so the steering stays consistent and the truck tracks straight after a tumble. The kit includes ball bearings, and it fits the Slash 4×4, Stampede 4×4, and Rustler 4WD. If your truck has vague steering or a wobble that survives new tires and a fresh alignment, worn steering blocks are a likely cause, and this is the fix.
Pro-Line clear bodies: Comp Wagon and 1997 Dakota
The Pro-Line Comp Wagon Cab-Only Clear Body for 12.3-Inch Wheelbase Crawlers is $59.99, and the Pro-Line 1997 Dodge Dakota Clear Body for 12.3-Inch 313mm Wheelbase Scale Crawlers is $59.99. Both are clear Lexan bodies for 12.3-inch wheelbase crawlers, so you paint the inside to your own scheme and cut the wheel wells to fit your chassis. The Comp Wagon is a cab-only competition shape, light and low, built for performance over scale detail. The Dakota is a full pickup body for scale builds. Measure your wheelbase before you order: 12.3 inches is 313mm, and a body built for that wheelbase will sit wrong on a shorter or longer chassis. Clear bodies arrive unpainted with window masks and decals, so budget an evening for paint and trimming.
Cherokee hard body shell kit
The 1/10 RC Crawler Hard Body Shell Kit, 313mm Wheelbase Cherokee Body for Axial SCX10, SCX10 II and TRX4 is $112.99. A hard body is a different build from a clear Lexan body. It is rigid, it takes scale details like door handles and trim, and it holds paint on the outside. The trade-off is weight and the work of assembly: a hard body kit is assembled and fitted piece by piece, and it is heavier than Lexan, so it raises the center of gravity. For a scale trail rig that crawls slow and poses for photos, that trade is worth it. For a competition truck, the clear bodies above are the lighter call. This kit is built for the 313mm wheelbase SCX10, SCX10 II, and TRX4 chassis.
Beadlock wheels and tires
The 2.2 Beadlock Wheels and Tires Set, 5.0-Inch Tall Tires with 40mm Wide Rims for RC Mud Crawler TRX4 Gen8 Capra Wraith is $131.99 for the set, which works out to $11.00 per wheel and tire. Beadlock wheels clamp the tire bead with a ring instead of gluing it, so you can change tires, swap foams, or replace a torn tire without destroying the wheel. The tires are 5.0 inches tall on 40mm wide rims, sized for mud and trail work on TRX4, Gen8, Capra, and Wraith rigs. A beadlock set is also the practical way to tune grip: change the foam insert and the tire behaves differently on the same wheel. Check your hex size and axle clearance before ordering, since 2.2 wheels are wider than stock 1.9 setups on many trucks.
Winch, roof rack, and light bar
The Metal RC Winch Kit with Controller for 1/10 RC Crawler TRX4 TRX6 Axial SCX10 D90 CC01 TF2 Wrangler is $42.99. A working winch is the recovery tool for a scale trail run: spool out, hook to a tree or a rock, and pull the truck out of a spot it cannot drive out of. The kit includes the controller, and it mounts to 1/10 crawler chassis including TRX4, TRX6, SCX10, D90, CC01, TF2, and Wrangler builds. Mount it low and centered so the pull does not twist the chassis, and keep the line clear of the tires.
The Metal Luggage Carrier Roof Rack with LED Light Bar for 1/10 RC Crawler Axial SCX10 Traxxas TRX-4 RC4WD CC01 D90, 245mm x 150mm is $48.99. The rack is 245mm by 150mm of metal luggage carrier, sized for 1/10 crawlers, with an LED light bar built in. It is the scale detail that also does a job: carry spares on the roof and light the trail after dark. Only one is in stock at this price, so if the rack is the part you want, order before it sells through.
The LED Roof Light Bar Kit, 45mm 4-Bead, for 1/10 and 1/8 Scale RC Crawler Axial SCX10 Wraith Traxxas TRX4 TRX6 Redcat Gen8 is $18.99. It is the standalone version of the same idea: a 45mm bar with 4 LED beads that fits 1/10 and 1/8 scale crawlers. Wire it to a switched channel or a spare receiver output so you can turn it off in daylight, and keep the leads clear of moving suspension parts.
Which parts to buy first
Start with the part that fixes a real problem on your truck. Vague steering or broken plastic points at the C-hub kit. A tired stock body points at one of the Pro-Line clear bodies for a light build or the Cherokee hard body for a scale build. A truck that cannot get itself out of trouble points at the winch. Wheels and tires change grip more than any other single part, so the beadlock set is the handling upgrade. The roof rack and light bar are scale detail and night running, worth adding once the truck drives the way you want it to.
Measure before you order. Wheelbase decides the body, hex size and width decide the wheels, and chassis layout decides where the winch and rack can mount. The store lists the fitment for every part above, and every part ships from our New York facility with the same USA shipping.
