
Best XING-E Pro 2207 KV for a 5-Inch FPV Racing Quad
XING-E Pro 2207 KV choice sets how fast the motor spins per volt on a 5 inch quad. The 1800KV option suits 6S builds, the 2450KV option suits 4S builds, and the 2750KV option spins fastest for light builds. The motor lists $59.99 with a 33.8 g weight, a 4 mm shaft, and a 35.22A burst rating.


Quick facts
| Fact | Value |
|---|---|
| KV options | 1800KV, 2450KV, 2750KV |
| Battery range | 2-6S LiPo |
| Weight | 33.8 g with 150 mm wires |
| Burst and power | 35.22A max burst, 845W max power |
| Shaft and mount | 4 mm shaft, 16×16 mm mount, M3 |
| Bearings | 9x4x4 mm NSK bearings |
How does XING-E Pro 2207 KV change a 5 inch quad?
KV states how fast the motor spins per volt with no load on the shaft.
The 2750KV option spins 53 percent faster per volt than the 1800KV option.
All 3 options share a 2207 stator, a 33.8 g weight, and a 2-6S battery range.
Which KV suits 4S and which suits 6S?
Pair lower KV with higher cell counts: 1800KV for 6S and 2450KV for 4S is the usual pairing.
The listing states a 2-6S range across all 3 KV options.
Check the 35.22A burst rating against your ESC rating before you fly.
What does the unibell design change?
The motor uses a unibell design with single-strand copper windings.
It uses N52SH curved magnets and 9x4x4 mm NSK bearings for smooth running.
The 4 mm hollow steel shaft uses a hex bolt set screw, per the listing.
When do you replace a rotor bell?
Replace the bell when a crash bends the shaft or cracks the bell.
The replacement bell fits XING2 2306 and 2207 motors from 1755KV to 2755KV.
It fits XING2 motors only, so check your motor series before you order it.
What did we check against the listings?
We counted 6 configuration options on the XING-E Pro listing, across 3 KV ratings.
We matched the 35.22A burst and the 845W power figures to its listing.
We counted 1 image on each of the three listings in this guide.
How the options compare
| Part | KV | Battery | Weight | Burst | Price |
|---|---|---|---|---|---|
| XING-E Pro 2207 | 1800/2450/2750KV | 2-6S | 33.8 g | 35.22A | $59.99 |
| XING2 rotor bell | 1755-2755KV | Not stated | Not stated | Not stated | $28.89 |
| RS2205 | 2300KV | 3-4S | 30 g | Not stated | $5.99 |
How do you pick XING-E KV in 5 steps?
- Pick your cell count first: 4S or 6S for a 5 inch quad.
- Pick the KV for that cell count: 2450KV for 4S, 1800KV for 6S.
- Check the frame mount: 16×16 mm with M3 screws.
- Check your ESC rating against the 35.22A burst figure.
- Fit 5 inch props and check motor direction before the first flight.
Parts that fit this guide
Check stock before you order, because in-stock parts ship from New York in 1-2 business days. Prices in this guide are the live store prices verified on November 12, 2026.
XING-E Pro 2207 Brushless Motor, 1800/2450/2750KV, 2-6S, for 5 Inch Props ($59.99)
XING-E Pro 2207 brushless motor at $59.99. It offers 1800, 2450, or 2750KV on 2-6S with a 35.22A burst rating.
XING2 Replacement Rotor Bell and Shaft for 2306/2207 Motors ($28.89)
XING2 replacement rotor bell and shaft at $28.89. It fits XING2 2306 and 2207 motors from 1755KV to 2755KV.
RS2205 2300KV Brushless Motor, CW/CCW, for 5 Inch FPV Racing ($5.99)
RS2205 2300KV brushless motor at $5.99. It lists 1024 g of thrust on 3-4S with an M5 shaft.
Shop the full range in the FPV Motors category at Quality RC Parts. See also: Related guide.
Frequently asked questions
Does the listing offer single motors or 4-packs?
Both. The listing offers 1-piece and 4-piece options for each of the 3 KV ratings.
Does the rotor bell fit the XING-E Pro motor?
No. The bell listing states XING2 2306 and 2207 motors only, so check your motor series first.
What shaft size does the XING-E Pro use?
It uses a 4 mm high-strength hollow steel shaft with a hex bolt set screw.
What is the idle current of the XING-E Pro?
The listing states 1.2A of idle current at 12.6V.
Sources
Last updated: November 17, 2026.
