Description
Six ESP32-DevKitC-32 development boards with a USB-C interface and 38 pins, offering more functions than 30-pin modules. The narrower width connects to a breadboard very well.
Each board integrates an antenna, RF balun, power amplifier, low noise amplifier, filter, and power management module, with 2.4 GHz WiFi and Bluetooth dual-mode, STA/AP/STA+AP modes, and common AT commands. Interfaces include UART, SPI, I2C, PWM, DAC, and ADC.
Specifications
- Quantity: 6 ESP32-DevKitC-32 development boards, 38 pins, narrow width
- USB: USB-C (Type-C) interface
- Wireless: 2.4 GHz WiFi + Bluetooth dual-mode, STA/AP/STA+AP, AT commands
- Interfaces: UART, SPI, I2C, PWM, DAC, ADC
- Integrated antenna, RF balun, power amplifier, low noise amplifier, filter, power management
In the box
Six ESP32-DevKitC-32 development boards.
How to use it
Plug a board into a breadboard, connect USB-C, and run a blink sketch in the Arduino IDE or MicroPython. Then run a WiFi scan to confirm wireless works. Six boards cover a classroom set, a multi-node sensor build, or spares for several projects.
Pairs with
A screw terminal breakout and breadboards give the boards somewhere to work. See ESP32 screw terminal breakout board 3-pack and ELEGOO 830-point breadboard 3-pack.
Compare
The HiLetgo 3-pack is the smaller pack of 38-pin USB-C boards. Alternative: HiLetgo ESP32 38-pin 3-pack.
Full comparison: ESP32 38-pin boards compared.
Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.








Reviews
There are no reviews yet.