35KG Coreless Digital Servo, DS3235, Stainless Steel Gear, Waterproof

$48.99

This DS3235 coreless digital servo delivers 35kg/cm of stall torque at 7.4V with stainless steel gears, dual ball bearings, and a waterproof case. Choose the 180 degree or 270 degree control angle version, for steering, throttle, and robot arm joints.

Create an account to earn at least 48 QRC Rewards points with this item.

Description

This 35KG coreless digital servo is the heavy joint servo for robot arms, large crawlers, and steering builds that stall smaller servos. The DS3235 coreless motor delivers 35kg/cm of stall torque at 7.4V, with 29kg/cm at 5V and 32kg/cm at 6V, and answers in 0.11 seconds per 60 degrees at 7.4V. Stainless steel gears with hard anodizing, dual ball bearings, and a CNC aluminum middle shell hold up under shock loads, and the waterproof case keeps wet grass, mud, and snow from ending the run.

A coreless motor has no iron core in the rotor, so it spins up faster, runs smoother, and vibrates less than a standard cored motor. That makes the DS3235 a good fit for joints that need fast, precise holding force: robot arm shoulders and elbows, RC car steering, and pan-tilt heads.

Control angle: choose the 180 degree or 270 degree version. The 180 degree version travels 180 degrees from end to end under a standard PWM servo signal, which covers steering, throttle, and most arm joints. The 270 degree version travels 270 degrees from end to end, for joints that need wider travel such as pan-tilt heads and gripper pivots. The product photos are marked with the control angle so there is no confusion about which version you are buying.

Specifications: operating voltage 5V to 7.4V DC. Stall torque 29kg/cm at 5.0V, 32kg/cm at 6.0V, 35kg/cm at 7.4V. Speed 0.13 seconds per 60 degrees at 5.0V, 0.12 at 6.0V, 0.11 at 7.4V. Stall current 1.9A at 5.0V, 2.1A at 6.0V, 2.3A at 7.4V. Size 40 x 20 x 38.5mm. Weight 60g. Lead length 285mm. Working frequency 50 to 333Hz. Includes one DS3235 servo, one 25T adjustable metal servo arm, and a set of mounting accessories.

Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.

How to use it: plug the servo into a receiver or servo driver, feed it 5V to 7.4V from a supply with enough current for stall peaks up to 2.3A, and drive it with a standard PWM servo signal. Mount it with the included arm and hardware, center the servo before fitting the arm, and check the travel direction before the first full run.

Pairs with: the RC Servo Tester for bench setup, the CNC Aluminum Alloy Servo Mount Bracket and Servo Mount Bracket 2-Set for solid mounting, and the 20KG Digital Servo, DS3218MG for lighter joints in the same build.

Compare: How to Build a Robot Arm with ESP32 and Servo Motors, How to Choose the Right Motor Drivers for Arduino Use, and How to Build a Pan-Tilt Camera with ESP32-CAM Servos.

Related buying guide: Servo vs Stepper for a Small Robot Arm: Torque, Holding, and Backlash

Additional information

Control Angle

180 Degree, 270 Degree

Reviews

There are no reviews yet.

Be the first to review “35KG Coreless Digital Servo, DS3235, Stainless Steel Gear, Waterproof”

Your email address will not be published. Required fields are marked *

You may also like…