3D Printer Bed Adhesive Glue, All-in-One Liquid, for ABS PLA PETG HIPS TPU, 50mL Bottle

$31.99

All-in-one liquid bed adhesive for 3D printing, 50mL bottle. Holds ABS, PLA, PETG, HIPS, and TPU prints flat through the print, then releases when cool. Odorless, non-flammable, cleans up with water.

5 in stock

Create an account to earn 31 QRC Rewards points with this item.

Description

This all-in-one liquid bed adhesive keeps the first layer stuck to the build plate through the whole print, then lets the model release once it cools. Shake the bottle, press the applicator, and spread a thin layer over the active print area. One 50mL bottle covers more than 100 prints. It fights warping on tall and wide prints, and it works on glass, PEI, flexible spring steel plates, and polyimide film surfaces.

Works with ABS, PLA, PETG, HIPS, and TPU filaments. Typical bed temperatures: PLA 60 degrees C, ABS 80 to 100 degrees C, ASA 85 to 100 degrees C, PETG 70 to 90 degrees C, TPU 60 degrees C. The formula is odorless and non-flammable, so it fits home, office, and classroom printers. Cleanup is water only: rinse the plate and the applicator with water when you are done.

Specifications: model MO2016. One bottle, 50mL, 1.69 fluid ounces. Liquid form, colourless, low viscosity, water resistant. No battery. The listing weight field is not quoted here: the source data for this bottle reads 0.1 grams, which is plainly wrong for a 50mL bottle, so no weight is claimed.

Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.

How to use it: shake the bottle well, press the applicator onto the build plate, and apply a thin layer over the print area. Print as normal. When the print is done, wait for the plate to cool, then lift the model off. Rinse the plate with water before the next print if adhesive has built up.

Pairs with: the PEI Build Plate 257x257mm, Double-Sided Smooth and Textured, Spring Steel, for X1C X1 X1E P1S P1P A1 P2S X2D for a double-sided PEI surface, the Creality 3D Printer Glue Stick, Pack of 1, 21g and the 3D Print Bed Adhesion Glue Stick, 21g for quick spot fixes, and 3D Printer Maintenance: Keep Your Printer Printing Like New for the weekly bed cleaning routine that keeps adhesion strong.

Compare: 3D Printer Maintenance: Keep Your Printer Printing Like New and PLA PLA+ PETG Filament: Which to Print RC Parts With.

Reviews

There are no reviews yet.

Be the first to review “3D Printer Bed Adhesive Glue, All-in-One Liquid, for ABS PLA PETG HIPS TPU, 50mL Bottle”

Your email address will not be published. Required fields are marked *