Description
FK-D1 M9 GPS module with a built-in QMC5883L geomagnetic compass, built for Pixhawk, ArduPilot, and other flight controllers that take a serial GPS with compass. The M9 chip tracks 32 satellites across GPS, Galileo, BeiDou, GLONASS, and QZSS at the same time, with a native 25 Hz update rate and 2 m positioning accuracy.
Wiring is a 6-pin SH1.0 connector: GND, 5V, Rx, Tx, SCL, SDA. Connect Rx to the flight controller Tx pin and Tx to the flight controller Rx pin. UART runs at 3.3V TTL level with a default baud rate of 115200 (4800 to 921600 supported), NMEA and UBX protocols. The compass talks over I2C on SCL and SDA.
The 25 x 25 mm tri-band ceramic antenna gives -167 dBm tracking sensitivity with a built-in high-gain low-noise amplifier. Cold start is 24 seconds, hot start 1 second. The module draws 80 mA at 5V, works from 3.6 to 5.5V, and is rated -40 to +85C. A blue PPS LED flashes once the module has a 3D fix. Size is 25 x 25 x 8 mm and weight is 12 g.
Specs: chipset M9, 92 channels; satellites up to 32; constellations GPS, Galileo, BeiDou, GLONASS, QZSS, SBAS; update rate up to 25 Hz; positioning accuracy 2 m; speed accuracy 0.05 m/s; heading accuracy 0.3 degrees; sensitivity -167 dBm tracking, -160 dBm recapture; power 3.6 to 5.5V, 80 mA at 5V; dimensions 25 x 25 x 8 mm; weight 12 g; operating temperature -40 to +85C.
Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.











Reviews
There are no reviews yet.