Description
NodeMCU ESP8266 development board built on the ESP-12E module, with a built-in 0.96 inch OLED display (SSD1306, 128×64, I2C), no separate display wiring needed. CH340 USB-serial chip, Micro USB, FLASH and RESET buttons, and a self-recovery fuse that protects the board against current overload and short circuits. Pin headers are included as shown.
Works with the Arduino IDE: select the NodeMCU 1.0 (ESP-12E Module) board and drive the display with the U8g2 library. The OLED uses SDA on GPIO14 and SCL on GPIO12. Choose the white, yellow-blue, or blue display version.
Key specs (verified)
- Module: ESP-12E (ESP8266) with WiFi
- Display: 0.96 inch SSD1306 OLED, 128×64, I2C (SDA GPIO14, SCL GPIO12)
- USB-serial: CH340, Micro USB
- Buttons: FLASH and RESET
- Protection: self-recovery fuse
- Works with: Arduino IDE (NodeMCU 1.0 ESP-12E board), U8g2 library
Pairs well with: ESP32-S3-CAM Development Board N16R8, Board, OV2640 or OV5640 Camera, 1/5/10-Pack.
I check every order before it ships. Ships from NY, USA.
Related buying guide: NodeMCU ESP8266 with Built-In OLED: WiFi Projects with a Display
Reviews
There are no reviews yet.