Description
A Pico 2 W microcontroller board with pre-soldered header, based on the Raspberry Pi RP2350 chip, with upgraded hardware from Pico 2 adding wireless communication, an onboard antenna, 2.4 GHz 802.11n WiFi, and Bluetooth 5.2, with flexible digital interfaces.
The dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor run at a flexible clock up to 150 MHz, with 520 KB of static RAM and 4 MB of on-board flash memory. 26 multi-function GPIO pins, 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 controllable PWM channels, and 12 programmable I/O (PIO) state machines. USB 1.1 with device and host support, low-power sleep and dormant modes, drag-and-drop programming using mass storage over USB, and a temperature sensor.
Specifications
- Chip: RP2350, dual-core Arm Cortex-M33 and dual-core Hazard3 RISC-V, up to 150 MHz
- Memory: 520 KB SRAM, 4 MB on-board flash
- Wireless: 2.4 GHz 802.11n WiFi, WiFi 4, Bluetooth 5.2, onboard antenna
- GPIO: 26 multi-function pins, 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 PWM channels, 12 PIO state machines
- USB 1.1 host and device, drag-and-drop programming, temperature sensor
- Pre-soldered header, castellated module
In the box
One Pico 2 W board with pre-soldered header, one 3-pin yellow pin header, and one USB-A to micro USB cable.
How to use it
Plug the board into a breadboard with the pre-soldered header, connect the included USB cable, and load MicroPython. Run a blink script first, then a WiFi scan to confirm wireless works.
Pairs with
An LCD display and a case finish the board. See Waveshare 1.3 inch LCD display for Pico and C4Labs Zebra Pico case.
Compare
The Waveshare Pico 2 W starter kit is the same RP2350 board with color headers in kit form. Alternative: Waveshare Pico 2 W starter kit.
Full comparison: Raspberry Pi Pico vs Pico W vs Pico 2.
Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.








Reviews
There are no reviews yet.