Sale!

Waveshare Pico 2 W Starter Kit, Compatible with Raspberry Pi Pico 2 W, RP2350, Color Headers, with USB Cable

Original price was: $35.99.Current price is: $28.99.

Waveshare Pico 2 W Starter Kit, compatible with Raspberry Pi Pico 2 W, RP2350 with color headers and a USB cable. Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.

Create an account to earn 28 QRC Rewards points with this item.

Description

The Waveshare Pico 2 W Starter Kit, compatible with the Raspberry Pi Pico 2 W microcontroller board, based on the official RP2350 chip with a dual-core and dual-architecture design. Upgraded hardware from Pico 2 adds wireless communication with an onboard antenna, 2.4 GHz 802.11n WiFi, and Bluetooth 5.2.

The RP2350 pairs a dual-core Arm Cortex-M33 processor with a dual-core Hazard3 RISC-V processor, running at a flexible clock up to 150 MHz. The onboard Infineon CYW43439 wireless chip supports WiFi 4 wireless and Bluetooth 5.2, with 520 KB of SRAM and 4 MB of on-board flash memory. USB 1.1 with device and host support, low-power sleep and dormant modes, drag-and-drop programming using mass storage over USB, 26 multi-function GPIO pins, 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 controllable PWM channels, a temperature sensor, and 12 programmable I/O (PIO) state machines. Wiki resources are provided.

Specifications

  • Chip: official RP2350, dual-core Arm Cortex-M33 and dual-core Hazard3 RISC-V, up to 150 MHz
  • Memory: 520 KB SRAM, 4 MB on-board flash
  • Wireless: onboard Infineon CYW43439, WiFi 4, Bluetooth 5.2, onboard antenna
  • GPIO: 26 multi-function pins, 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 PWM channels, 12 PIO state machines
  • USB 1.1 host and device, drag-and-drop programming, temperature sensor
  • Starter Kit with pre-soldered color headers
  • Compatible with Raspberry Pi Pico 2 W; this is a Waveshare compatible board, not a genuine Raspberry Pi board

In the box

One Waveshare Pico 2 W Starter Kit: board with pre-soldered color headers, a USB cable, and a 3-pin header.

How to use it

Plug the board into a breadboard with the color headers, connect the included USB cable, and load MicroPython. Run a blink script first, then a WiFi scan to confirm wireless works. The RP2350 runs Arm Cortex-M33 or RISC-V cores.

Pairs with

An LCD display and a case finish the board. See Waveshare 1.3 inch LCD display for Pico and C4Labs Zebra Pico case.

Compare

The Waveshare Pico 2 W board is the same RP2350 board with a standard pre-soldered header and USB cable. Alternative: Waveshare Pico 2 W with header and USB cable.

Full comparison: Raspberry Pi Pico vs Pico W vs Pico 2.

Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.

Reviews

There are no reviews yet.

Be the first to review “Waveshare Pico 2 W Starter Kit, Compatible with Raspberry Pi Pico 2 W, RP2350, Color Headers, with USB Cable”

Your email address will not be published. Required fields are marked *