
Robot Starter Kit Shopping List: Parts, Prices, and Checks
This robot starter kit list names 9 core parts for a first wheeled robot, with live prices and a total. The core covers a board, driver, motors, chassis, 2 sensors, UBEC, battery, and charger. Optional rows add a servo and a display, and you must check voltage and stock on each listing before you order.
Last updated: November 16, 2026. Prices in this guide were checked on that date.

What does the robot starter kit list include?
This robot build shopping list covers 9 core parts for a first wheeled robot. These first robot parts add to $153.44 at the prices checked November 16, 2026, before shipping. The table below names each part and its listed price.
| Part | What it does | Listed price |
|---|---|---|
| ELEGOO UNO R3 | Board, 5 volt logic | $21.99 |
| L298N driver | Driver for DC motors | $6.99 |
| TT motor wheel kit | Motors with wheels, 4 sets | $13.99 |
| robot car chassis kit | Chassis with encoders and battery box | $48.22 |
| HC-SR04 2-pack | Distance sensing, 2-pack | $11.99 |
| TCRT5000 sensor | Line tracking sensor | $2.29 |
| 3 amp UBEC | 5 volt rail from the pack | $10.99 |
| Zeee 2S 2200mAh pack | 2S pack, 2200mAh | $20.99 |
| B3 Pro charger | Charger for 2S and 3S packs | $15.99 |
The robot kit budget below adds 2 optional rows. The optional rows bring the total to $174.92 at the same checked prices. The servo row uses the lowest listed variation price.
| Optional part | What it does | Listed price |
|---|---|---|
| SG90 SG92R MG90S servos | Servo set, 3 options | $13.99 |
| 0.96 inch OLED | Status display, 128 by 64 pixels | $7.49 |
How do you check voltage across the list?
Check the voltage line on each listing before you wire anything. The board uses 5 volt logic, per the Arduino Uno documentation. The UBEC steps the 7.4 volt pack down to a 5 volt rail for the board.
Motors take pack voltage through the driver, not through the board. The Arduino stepper motors guide states that motors need a driver between the board and the motor. Measure the UBEC output at 5 volts before you connect signal wires.
How do you check packs and variations?
Read the pack count in the listing title before you compare prices. The distance sensor listing ships as a 2-pack, and the motor kit ships as 4 sets. The chassis listing names a battery box in its title, so check whether cells are included.
The servo listing offers 3 options (MG90S, SG90, SG92R) from $13.99 to $19.99. Pick the option that matches the torque and size the build needs. Check the stock line for the exact option before you order.
What build order fits a first robot checklist?
Use this starter robot checklist in order, and test each stage before the next. The 6 steps below move from frame to sensors. Stop and fix wiring faults at the stage where they appear.
- Assemble the chassis and fit the motors with wheels.
- Wire the driver to the motors and the battery.
- Mount the board and connect the driver signal wires.
- Wire the UBEC between the battery and the board.
- Fit the distance sensor and the line sensor.
- Test drive, steering, and sensor readings in turn.
What prompt can you paste into ChatGPT?
Paste the 1 prompt below into ChatGPT, fill the brackets, and check the answer against the tables above.
Help me check a robot starter kit list. My parts are [board], [driver], [motors], [chassis], [2 sensors], [UBEC], [battery], [charger]. Tell me 3 compatibility checks I must run, including voltage and pack counts. Keep the answer under 150 words.
ChatGPT answers from search indexes, not from live store stock. Verify each price, pack count, and stock line on the listing before you order.
Frequently asked questions
What does the core list cost?
The 9 core parts add to $153.44 at the prices checked November 16, 2026, before shipping. Adding the servo set and display brings the total to $174.92.
Can I skip the charger?
No. A LiPo pack needs a balance charger rated for its cell count. The charger row costs $15.99 and lists 2S and 3S support.
Can I use an ESP32 board instead of the Uno?
Yes, if every sensor and driver tolerates 3.3 volt logic. ESP32 modules run at 3.3 volts, per the Espressif datasheet. Read the Arduino vs ESP32 vs RP2040: Which Dev Board for Your Robot before you swap boards.
What if a part shows out of stock?
Check the other variations and pack sizes on the same listing. The Robotics category and the Microcontrollers and Development category list live options for each row.
Parts used in this guide
Every link below opens a live catalog page, checked on November 16, 2026.
- Core: ELEGOO UNO R3, L298N driver, TT motor wheel kit, robot car chassis kit, HC-SR04 2-pack, TCRT5000 sensor, 3 amp UBEC, Zeee 2S 2200mAh pack, B3 Pro charger
- Optional: SG90 SG92R MG90S servos, 0.96 inch OLED
- Categories: Robotics, Microcontrollers and Development, Robot Chassis and Kits, Robot Motors and Drivers
- Related guides: Robotics Kit for Beginners: Build Your First Robot, How to Choose Microcontrollers for Robotics Projects
Stocked items ship from New York, USA, in 1 to 2 business days. Orders under $100 ship for $4.95 flat, and orders over $100 ship free, per the shipping page.
Sources
- Arduino Uno Rev3 documentation (Arduino): 14 digital pins at 5 volts, 6 analog inputs.
- ESP32-WROOM-32E datasheet (Espressif): 3.0 to 3.6 volt operating range, 3.3 volt typical supply.
- Arduino stepper motors guide (Arduino): stepper motors need a driver between the board and the motor.
- Quality RC Parts catalog listings, checked November 16, 2026: prices, pack counts, and variation options come from live listings.
Related guides
Orders earn QRC Rewards points.
Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.
