Description
The ESP32-S3 camera board combines a dual-core 240MHz LX7 processor with the OV2640 2MP camera for AI edge computing, image recognition, and video streaming projects. 45 GPIOs, a dedicated camera interface, and USB OTG cover serious builds, with ESP-IDF, Arduino, MicroPython, and LVGL support.
Key specs:
- Processor: ESP32-S3 dual-core Xtensa LX7, up to 240MHz
- Camera: OV2640 2MP with dedicated DVP camera interface
- Wireless: WiFi + Bluetooth 5 LE, dual mode
- GPIOs: up to 45, with I2C, SPI, UART, I2S, PWM, USB OTG
- Memory: 16MB flash (N16R8 class)
- Platforms: ESP-IDF, Arduino, VSCode, MicroPython, LVGL, TinyML
- AI: native vector instructions (SIMD) for neural-network acceleration
What’s included: 1 x ESP32-S3 board with OV2640 camera.
Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.
ESP32-S3-CAM in depth: the S3 generation of the ESP32-CAM camera board
If you searched for an ESP32-CAM board, this ESP32-S3-CAM board is the S3 generation of that camera-board line: the same WiFi camera-board idea, built on the ESP32-S3 with more GPIOs, more memory, and native AI acceleration. The OV2640 camera connects through a dedicated DVP camera interface, and the board streams video over WiFi or captures stills for image recognition work.
Specifications
| Processor | ESP32-S3 dual-core Xtensa LX7, up to 240 MHz |
|---|---|
| Camera | OV2640, 2MP, 1600×1200 UXGA, with on-chip JPEG compression and built-in image signal processing |
| Memory | 16MB flash + 8MB RAM; 384KB ROM and 512KB SRAM on chip |
| Wireless | WiFi 802.11 b/g/n + Bluetooth 5 (LE), with BLE Mesh |
| GPIOs and interfaces | Up to 45 GPIOs; I2C, SPI, UART, I2S, PWM, USB OTG, and a dedicated DVP camera interface supporting the OV2640 and other camera modules |
| Analog | Two 12-bit ADCs, 20 channels; DAC included |
| Power modes | Active, Modem sleep, Light sleep, and Deep sleep |
| USB | USB Type-C |
| Platforms | ESP-IDF, Arduino, VSCode, MicroPython, LVGL, TinyML; FreeRTOS and Zephyr operating systems |
| AI acceleration | Native vector instructions (SIMD) for neural-network acceleration; I2S for voice input and output |
| Tutorials and resources | Source code for ESP-IDF, Arduino, MicroPython, and LVGL, camera init and video streaming examples, datasheets, dev tools, and hardware schematics |
Compatibility
Works with ESP-IDF, Arduino, VSCode, MicroPython, and LVGL projects, on FreeRTOS or Zephyr. The DVP camera interface supports the OV2640 and other camera modules. The GPIO set covers common peripherals such as LCDs, sensors, LEDs, batteries, motors, and touch sensors, with I2S available for voice input and output.
What is included: 1 x ESP32-S3 board with OV2640 camera.
What you can build
Smart home IoT devices, DIY camera builds, robotics and drone vision, STEAM classroom projects, AI edge computing with object recognition, voice control, LED lighting control, LCD and LVGL display projects, and touch-sensor builds. The low-power sleep modes suit battery-powered camera nodes that wake, capture, and sleep again.
Questions and answers
Does this board work with Arduino? Yes. Arduino is one of the supported platforms, along with ESP-IDF, VSCode, MicroPython, and LVGL, with source code and camera examples included in the tutorial bundle.
What camera does it use? The OV2640 2MP camera sensor at 1600×1200 UXGA, with on-chip JPEG compression. The DVP interface also supports other camera modules.
How much memory does it have? 16MB flash + 8MB RAM, with 384KB ROM and 512KB SRAM on chip.
Can it run AI workloads? Yes. Native vector instructions (SIMD) accelerate neural networks for gesture, voice, and image recognition at the edge.
This item is fulfilled in the USA. Shipped fast and securely from our secure facility in New York, providing fast, high quality USA shipping.
QRC Rewards: Every order earns 1 point per $1 of the parts total after discount, before shipping and tax, awarded when the order is completed. New accounts get a 50 point signup bonus. An approved verified-purchase review earns 100 points, once per product. Referrals earn 100 points for the referrer and 50 points for the friend. Redeem 100 points for $5 off, in steps up to $25 off per order, on orders of $15 or more. Each reward coupon is good for 30 days, single use, and cannot be combined with another coupon. Learn more: How the Quality RC Parts Rewards Program Works and How to Earn Points and Redeem Rewards at Quality RC Parts.
Guides: How to Use the ESP32-S3-CAM Board for Camera Projects, Best ESP32-S3-CAM vs ESP32-CAM Board for Camera Builds, How to Choose ESP32-CAM Boards for WiFi Camera Projects, and How to Start with ESP32-CAM for WiFi Camera Projects.















Reviews
There are no reviews yet.