How to Replace DJI FPV Propellers With 5328S Blades
DJI FPV propellers come as 5328S blades in CW and CCW pairs, and a quad needs both types across its 4 motors. The 8-piece set in this guide lists CW and CCW blades for the DJI FPV Combo. Match the marked blade to the marked motor, then test hover before normal flight.
Quick facts
| Fact | Value |
|---|---|
| Propeller | 5328S |
| Set | 8 pieces, CW and CCW |
| Fits | DJI FPV Combo |
| Tool pins | 2.9, 1.9, 1.9, 1.7, 0.9 mm |
| Lowest price here | $13.50 |
Which propellers fit the DJI FPV?
DJI FPV propellers are 5328S blades. The 8-piece set in this guide lists CW and CCW props for the DJI FPV Combo.
Do not fit Mini or Avata props on a DJI FPV. Each DJI model uses its own prop size and mount.
A full set needs 2 CW and 2 CCW blades. Buy a full set, not a single blade, so both pairs match.
What is the difference between CW and CCW blades?
CW blades spin clockwise and CCW blades spin counter-clockwise. A quad needs both types across its 4 motors.
Match the marked blade to the marked motor. DJI states this marked-pair rule on its Mini 3 Pro support page, and the same care applies here.
A blade on the wrong motor spins the wrong way. The drone will not lift straight, so land at once if it tilts on takeoff.
Which spare props fit other DJI models?
Each DJI model uses its own spare prop. The table below lists the spare prop part for 8 DJI models with live prices.
Mini 4 Pro props are quick-release, while Mini 3 Pro and Mini 2 SE props screw on. Check the mount before you order.
Cross-check the model name on the listing, not the photo. Photos look alike across the Mini line.
Which tool pulls a press-fit prop?
The Mini Propeller Remover in this guide pulls press-fit props on BetaFPV Air65 and Air75 micro quads. It is not a DJI FPV tool.
Its pins measure 2.9, 1.9, 1.9, 1.7, and 0.9 mm, per the listing. Pick the pin that fits the prop hub.
DJI FPV props are quick-release, so they need no puller. Use the remover only on press-fit micro props.
What did we check on the bench?
We checked the 5328S listing states DJI FPV Combo fitment and CW and CCW blades. We counted 8 blades in the set.
We checked the remover listing states BetaFPV Air65 and Air75 fitment, so we do not list it as a DJI FPV tool.
We matched the marked-pair rule to the DJI Mini 3 Pro support page, not to a seller claim.
How the options compare
| DJI model | Spare prop part | Price |
|---|---|---|
| Mini 4 Pro | Replacement propellers | $13.93 |
| Mini 3 Pro | 8-piece propellers | $10.69 |
| Mini 2 SE | Replacement propellers | $14.38 |
| Air 3, Air 3S | 5747F propellers | $12.35 |
| Avata 2 | 3032S propellers | $9.27 |
| Flip | Flip propellers | $11.14 |
| Neo, Neo 2 | Neo propellers | $5.93 |
| DJI FPV | 5328S propellers | $29.57 |
How do you replace a DJI FPV propeller?
- Power the drone off and remove the battery.
- Note the CW or CCW mark on the old blade before you remove it.
- Pull the old blade off the motor hub.
- Press the new blade on the matching motor, marked to marked.
- Spin the prop by hand, refit the battery, and run a short hover test.
Parts that fit this guide
In-stock parts ship from the New York, USA warehouse in 1-2 business days. Prices below are the live store prices we verified on November 10, 2026.
8pcs Propellers 5328S Blades CW/CCW Props for DJI FPV Combo Drone Accessories ($29.57)
8 propellers at $29.57 for the DJI FPV Combo. 5328S blades in CW and CCW pairs for a full spare set.
Mini Propeller Remover Tool ($13.50)
Mini propeller remover at $13.50. It pulls press-fit props on BetaFPV Air65 and Air75 micro quads, not DJI quick-release props.
Related parts: Propeller for DJI Mini 4 Pro Replacement Low-Noise and Quick-Release Blades Props Wings For DJI Mini 4 Pro: Spare props for the Mini 4 Pro.; 8X Precise&Flexible Propellers for DJI Mini 3/3 Pro Props Blade Replacement Light Weight Wing Fans Spare: Spare props for the Mini 3 Pro.; Propellers for DJI Mini 2/Mini SE/Mini 2 SE/Mini 4K Drone Replacement Low-Noise and Quick-Release Blades: Spare props for the Mini 2 SE.; 4Pcs/8Pcs Propellers 5747F Low Noise Blade Quick-release CW/CCW Propeller for DJI Air 3/Air 3S Drone: Spare props for the Air 3 and Air 3S.; 4pcs Avata 2 Propellers 3032S Blade Propeller Replacement Spare Parts For DJI Avata 2 Drone Accessories: Spare props for the Avata 2.; Propeller for DJI FLIP Wing Replacement Props Blade Fans With Screwdrivers Spare Parts Quick Release: Spare props for the Flip.; 1/2 Pairs Propeller for DJI NEO NEO 2 Wing Replacement Props Blade Fans With Screwdrivers Spare Parts Quick: Spare props for the Neo and Neo 2..
Shop the full range: DJI Accessories at Quality RC Parts. See also: Related guide.
Frequently asked questions
Do Mini 4 Pro props fit the DJI FPV?
No. The DJI FPV uses 5328S blades. Each DJI model uses its own prop size and mount, so buy props that list the DJI FPV Combo.
How do I tell CW from CCW blades?
Match the mark on the blade to the mark on the motor. A blade on the wrong motor spins the wrong way and the drone tilts on takeoff.
Do I need the prop remover for DJI FPV props?
No. DJI FPV props are quick-release and need no puller. The remover suits press-fit props on BetaFPV Air65 and Air75 micro quads.
How many blades are in the 5328S set?
The set holds 8 blades in CW and CCW pairs, which covers all 4 motors with spares.
Sources
Last updated: November 10, 2026.